Wiki

This version (14 Sep 2022 13:48) was approved by Angu Sewa.

Click here to return to the Basic page

Clipping Detection


Description

The clipping detection module can be used to identify whether there is a clipping in a particular wave form. It indicates the signal reaching the onset of its maximum permitted peak-to-peak voltage value before an overload is occurring. This will help in preventing severe, audible distortion to be generated through the audio signal chain.


Targets Supported

Name ADSP-214xx ADSP-215xx/SC5xx ADAU145x/146x
—————————— ——————-- ——————————-- —————————-
Clipping Detection NA B NA


Pins

Input

NameTypeDescription
———————- ————-- ———————-
Input0 Audio Input channel0

Output

NameTypeDescription
———————- ————-- ———————-
Output0 Audio Output channel0
ClippingFlag Control Clipping detection flag


Configurable Parameters

GUI Parameter NameDefault ValueRangeFunction Description
—————————————- ———————- —————— —————————————-
Enable False True / False Enable or disable the clipping detection
Delay 64 8 to 1024 Scales the delay factor
FixedAddress False True / False Enable or disable the Fixed Address mode
OutBlockSizeFactor 2 2 to 10 Scales the Block size out factor


DSP Parameters

Parameter Name Description ADSP-214xx/SC5xx/215xx ADAU145x/146x
—————————————- ——————————————————————————-- —————————————- —————————-
Enable zero or one depends on the state Integer32 NA
Delay Delay Factor Integer32 NA


resources/tools-software/sigmastudiov2/modules/basic/clipdetection.txt · Last modified: 14 Sep 2022 13:47 by Angu Sewa