This version (18 May 2021 08:53) was approved by John Joseph.The Previously approved version (08 Feb 2021 04:04) is available.
Table of Contents
Click here to return to the Arithmetic and Logic page
Trigonometry
Description
This Module implements the basic trigonometric functions such as sine, cosine, tan, inverse sine, inverse cosine, inverse tan. This Module can be grown. When grown, both control and input, output pins are grown.
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| —————————— | ——————-- | ——————————-- | —————————- |
| BufferGate | B | B | NA |
Pins
Input
| Name | Type | Description |
|---|---|---|
| ————————————— | —————————- | ————————————— |
| Input | Audio | Input channel |
Output
| Name | Type | Description |
|---|---|---|
| ————————————— | —————————- | ————————————— |
| Output | Audio | Output channel |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| —————————————— | ————————-- | ————————— | ————————————————————————-- |
| Operation | Sin | NA | Trigonometric Operation |
| Input Gain | 1 | -16 → 16 | Gain applied on the input |
| Phase | 0 | 0 → 360 | Phase of the input |
| Output Gain | 1 | -16 → 16 | Gain applied on the output |
| Offset | 0 | -16 → 16 | Offset of the output |
DSP Parameters
| Parameter Name | Description | ADSP-214xx/SC5xx/215xx | |
|---|---|---|---|
| ———————————— | ———————————————————- | ———————————————- | ————————————— |
| Operation | Trigonometric Operation | Float | |
| Input Gain | Gain applied on the input | Float | |
| Phase | Phase of the input | Float | |
| Output Gain | Gain applied on the output | Float | |
| Offset | Offset of the output | Float |
resources/tools-software/sigmastudiov2/modules/arithmeticandlogic/trignometry.txt · Last modified: 06 May 2021 15:09 by Krithika Manchale