Wiki

This version is outdated by a newer approved version.DiffThis version (10 Feb 2021 13:14) was approved by Sanjeeva Reddy.

This is an old revision of the document!


Click here to return to the Arithmetic and Logic page

Summation


Description

The Summation block adds the input to the sum of previous inputs and outputs the result of sum.

Usage

The Reset pin is available to reset the summation result. Other than the zero to reset pin, resets the summation value.

Targets Supported

NameADSP-214xx(Sample)ADSP-214xx(Block)ADSP-215xx/ADSP-SC5xx(Sample)ADSP-215xx/ADSP-SC5xx(Block)
Summation No YesNo Yes

Pins

Input

NameTypeDescription
ResetControlResets the summation result
Input0AudioInput channel 10

Output

NameTypeDescription
Output0AudioOutput channel 0

Configurable Parameters

GUI Parameter NameDefault ValueRangeFunction Description
NumChannels220Number of input and output channels. Change in this value requires re-compilation

DSP Parameters

No DSP parameters

resources/tools-software/sigmastudiov2/modules/arithmeticandlogic/summation.1580798252.txt.gz · Last modified: 04 Feb 2020 07:37 by Sanjeeva Reddy