This version (18 May 2021 08:51) was approved by John Joseph.The Previously approved version (04 Feb 2020 07:37) is available.
Table of Contents
Click here to return to the Arithmetic and Logic page
Summation
Description
The Summation block adds the input to the sum of previous inputs and outputs the result of sum.
Usage
The Reset pin is available to reset the summation result. Other than the zero to reset pin, resets the summation value.
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| —————————— | ———————- | ———————————- | —————————- |
| Summation | B | B | NA |
Pins
Input
| Name | Type | Description |
|---|---|---|
| ———————————— | —————————-- | ————————————— |
| Reset | Control | Resets the summation result |
| Input0 | Audio | Input channel 10 |
Output
| Name | Type | Description |
|---|---|---|
| ——————————-- | —————————— | ————————————— |
| Output0 | Audio | Output channel 0 |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| ——————————————- | ————————- | ———————-- | ——————————————————- |
| NumChannels | 2 | 20 | Number of in/out channels. Change in this value requires re-compilation |
DSP Parameters
No DSP parameters
resources/tools-software/sigmastudiov2/modules/arithmeticandlogic/summation.txt · Last modified: 06 May 2021 11:41 by Krithika Manchale