This version (18 May 2021 08:51) was approved by John Joseph.The Previously approved version (04 Feb 2020 07:34) is available.
Table of Contents
Click here to return to the Arithmetic and Logic page
Signal Multiply
Description
The Signal Multiply block multiplies two incoming signals together. This can be used for modulation or other design situations where multiply operation is needed.
Variants
- Signal Multiply
- Scalar Multiply
- Complex Signal Multiply
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| ————————————-- | ——————-- | ——————————-- | —————————- |
| Signal Multiply | B/S | B/S | B/S |
| Scalar Multiply | NA | NA | B |
| Complex Signal Multiply | NA | NA | B |
Pins
Input
| Name | Type | Description |
|---|---|---|
| ———————————- | ——————————- | —————————————- |
| Input0 | Audio | Input channel 0 |
| Input1 | Audio | Input channel 1 |
Output
| Name | Type | Description |
|---|---|---|
| —————————— | ———————— | ———————————————-- |
| Result | Audio | Multiplication result of all input signals |
Configurable Parameters
No configurable parameters
DSP Parameters
No DSP parameters
resources/tools-software/sigmastudiov2/modules/arithmeticandlogic/signalmultiply.txt · Last modified: 06 May 2021 12:00 by Krithika Manchale