This version is outdated by a newer approved version.
This version (10 Feb 2021 13:13) was approved by Sanjeeva Reddy.
This version (10 Feb 2021 13:13) was approved by Sanjeeva Reddy.This is an old revision of the document!
Table of Contents
Click here to return to the Arithmetic and Logic page
Signal Invert
Description
The SignalInvert block inverts the polarity of the incoming signal.Signal invert entails a 180-degree phase shift, making the positive components of waveform to negative and negative components of waveform to positive.
Usage
Check the box to enable this block.
Targets Supported
| Name | ADSP-214xx(Sample) | ADSP-214xx(Block) | ADSP-215xx/ADSP-SC5xx(Sample) | ADSP-215xx/ADSP-SC5xx(Block) |
|---|---|---|---|---|
| Signal Invert | Yes | Yes | Yes | Yes |
Pins
Input
| Name | Type | Description |
|---|---|---|
| Input | Audio | Input channel 0 |
Output
| Output | Control | Output channel 0 |
Configurable Parameters
| GUI Parameter Name | Default Value | Range | Function Description |
|---|---|---|---|
| IsInverted | False | True/False | Inverts the input signal polarity |
DSP Parameters
| Parameter Name | Description | ADSP-214xx/SC5xx/215xx |
|---|---|---|
| IsInverted | Inverts the input signal polarity | Float |
DSP Parameter Computation
IsInverted = IsInverted? -1:1
resources/tools-software/sigmastudiov2/modules/arithmeticandlogic/signalinvert.1580798009.txt.gz · Last modified: 04 Feb 2020 07:33 by Sanjeeva Reddy