Wiki

This version (14 Sep 2022 13:37) was approved by Angu Sewa.The Previously approved version (07 May 2021 07:33) is available.Diff

Click here to return to the Arithmetic and Logic page

Signal Invert


Description

The SignalInvert block inverts the polarity of the incoming signal.Signal invert entails a 180-degree phase shift, making the positive components of waveform to negative and negative components of waveform to positive.

Usage

Check the box to enable this block.

Targets Supported

Name ADSP-214xx ADSP-215xx/SC5xx ADAU145x/146x
—————————— ————————-- ———————————- —————————-
Signal Invert B/S B/SS

Pins

Input

NameTypeDescription
———————————— —————————— —————————————-
InputAudioInput channel 0

Output

NameTypeDescription
———————————— —————————— —————————————-
OutputControlOutput channel 0

Configurable Parameters

GUI Parameter NameDefault ValueRangeFunction Description
————————————- ——————————- ——————————-- ————————————————-
IsInvertedFalseTrue/FalseInverts the input signal polarity

DSP Parameters

Parameter NameDescription
———————————————————— ———————————————-
IsInvertedInverts the input signal polarity

DSP Parameter Computation

Output = IsInverted? -Input:Input

resources/tools-software/sigmastudiov2/modules/arithmeticandlogic/signalinvert.txt · Last modified: 14 Sep 2022 13:37 by Angu Sewa