Wiki

This version is outdated by a newer approved version.DiffThis version (18 May 2021 08:51) was approved by John Joseph.The Previously approved version (04 Feb 2020 07:32) is available.Diff

This is an old revision of the document!


Click here to return to the Arithmetic and Logic page

Signal Divide


Description

The Signal Divide block divide two incoming signals. The division is performed by using the Newton-Rapson method.

Variants

  1. Signal Divide
  2. Complex Signal Divide


Targets Supported

Name ADSP-214xx ADSP-215xx/SC5xx ADAU145x/146x
—————————————— ——————-- ——————————-- —————————-
Signal Divide B/S B/S B/S
Complex Signal Divide NA NA B


Pins

Input

NameTypeDescription
———————————— —————————— —————————————-
DividentControlInput channel 0
DivisorControlInput channel 1

Output

NameTypeDescription
———————————— —————————— —————————————-
ResultControlOutput channel 0

Configurable Parameters

No configurable parameters

DSP Parameters

NO DSP Parameters

resources/tools-software/sigmastudiov2/modules/arithmeticandlogic/signaldivide.1620365086.txt.gz · Last modified: 07 May 2021 07:24 by Krithika Manchale