Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.
[[resources:tools-software:sigmastudiov2:gettingstarted:executeexampleproject|Return to the parent page]]
=====Loader File Generation=====

<note>The path of elfloader.exe and initcode .exe should be updated based on the CCES version number and path of installation. The below commands by default will have the CCES version recommended for the given release and the default installation path</note>
\\
Use the following command to generate the loader file for ADSP-SC598 EV-SOM with Carrier board.
  "C:\Analog Devices\CrossCore Embedded Studio 2.11.1\elfloader.exe" -proc ADSP-SC598 -core0=SS_App_Core0 -init "C:\Analog Devices\CrossCore Embedded Studio 2.11.1\SHARC\ldr\ezkitSC598W_initcode_core0" -core1=SS_App_Core1.dxe -core2=SS_App_Core2.dxe -NoFinalTag=SS_App_Core0 -NoFinalTag=SS_App_Core1.dxe -b SPI -f BINARY -Width 8 -bcode 0x1 -verbose -o SS_App_SC598.ldr
  
Use the following command to generate the loader file for ADSP-SC594 EV-SOM with Carrier board.
  "C:\Analog Devices\CrossCore Embedded Studio 2.11.1\elfloader.exe" -proc ADSP-SC594 -core0=SS_App_Core0 -init "C:\Analog Devices\CrossCore Embedded Studio 2.11.1\SHARC\ldr\ezkitSC594W_initcode_core0" -core1=SS_App_Core1.dxe -core2=SS_App_Core2.dxe -NoFinalTag=SS_App_Core0 -NoFinalTag=SS_App_Core1.dxe -b SPI -f BINARY -Width 8 -bcode 0x1 -verbose -o SS_App_SC594.ldr

Use the following command to generate the loader file for ADSP-21593 EV-SOM with Carrier board.
  "C:\Analog Devices\CrossCore Embedded Studio 2.11.1\elfloader.exe" -proc ADSP-21593 -core1=SS_App_Core1.dxe -init "C:\Analog Devices\CrossCore Embedded Studio 2.11.1\SHARC\ldr\ezkit21593_initcode_core1.dxe" -core2=SS_App_Core2.dxe -NoFinalTag=SS_App_Core1.exe -b SPI -f BINARY -Width 8 -bcode 0x1 -verbose -o SS_App_21593.ldr

Use the following command to generate the loader file for ADSP-SC584 EZ-Board.
  "C:\Analog Devices\CrossCore Embedded Studio 2.11.1\elfloader.exe" -proc ADSP-SC584 -core0=SS_App_Core0 -init "C:\Analog Devices\CrossCore Embedded Studio 2.11.1\SHARC\ldr\ezkitSC584_initcode_core0_v10" -core1=SS_App_Core1.dxe -core2=SS_App_Core2.dxe -NoFinalTag=SS_App_Core0 -NoFinalTag=SS_App_Core1.dxe -b SPI -f BINARY -Width 8 -bcode 0x1 -verbose -o SS_App_SC584.ldr
  
Use the following command to generate the loader file for ADSP-SC589 EZ-Board.
  "C:\Analog Devices\CrossCore Embedded Studio 2.11.1\elfloader.exe" -proc ADSP-SC589 -core0=SS_App_Core0 -init "C:\Analog Devices\CrossCore Embedded Studio 2.11.1\SHARC\ldr\ezkitSC589_initcode_core0_v10" -core1=SS_App_Core1.dxe -core2=SS_App_Core2.dxe -NoFinalTag=SS_App_Core0 -NoFinalTag=SS_App_Core1.dxe -b SPI -f BINARY -Width 8 -bcode 0x1 -verbose -o SS_App_SC589.ldr

Use the following command to generate the loader file for ADSP-SC573 EZ-Board.
  "C:\Analog Devices\CrossCore Embedded Studio 2.11.1\elfloader.exe" -proc ADSP-SC573 -core0=SS_App_Core0 -init "C:\Analog Devices\CrossCore Embedded Studio 2.11.1\SHARC\ldr\ezkitSC573_initcode_core0" -core1=SS_App_Core1.dxe -core2=SS_App_Core2.dxe -NoFinalTag=SS_App_Core0 -NoFinalTag=SS_App_Core1.dxe -b SPI -f BINARY -Width 8 -bcode 0x1 -verbose -o SS_App_SC573.ldr
  
Use the following command to generate the loader file for ADSP-21569 EV-SOM with Carrier board and EZ-Board.
  "C:\Analog Devices\CrossCore Embedded Studio 2.11.1\elfloader.exe" -proc ADSP-21569 SS_App_Core1 -init ezkit21569_initcode.dxe -b SPI -f BINARY -Width 8 -bcode 0x1 -verbose -o SS_App_21569.ldr
  
<note>The default ADSP-21569 target application supported for EV-21569-SOM with CRR board and to make the same application to work with ADSP-21569 EZ-KIT, please remove the "ADSP_21569_SOM" macro from the CCES project compiler preprocessor properties.</note>
 
Use the following command to generate the loader file for ADSP-21489 or the example application CCES project itself generate the SS_App_21489.ldr loader file.
  "C:\Analog Devices\CrossCore Embedded Studio 2.11.1\elfloader.exe" -proc ADSP-21489 -si-revision any -bspi -fbinary -hostwidth 8 -l"C:\Analog Devices\CrossCore Embedded Studio 2.11.1\SHARC\ldr\489_spi.dxe" -o "./SS_App_21489.ldr" "./SS_App_21489.dxe"
=====Programming the Flash=====
\\
Batch files for programming the flash are provided under '**SigmaStudioPlus-Relx.y.z\Target\Utilities\FlashProgrammer**' folder and pre-built loader files (LDR) are provided under '**SigmaStudioPlus-Relx.y.z\Target\Examples\LDR**' folder.
\\
<note>The path of cldp.exe inside the batch files should be updated based on the CCES version number and path of installation. The batch file by default will have the CCES version recommended for the given release and the default installation path</note>
\\
Use the following command to program the flash on ADSP-SC598 EV-SOM with Carrier using the pre-built SS_App_SC598.ldr loader file.
  Flash_ADSPSC59x.bat SC598 XXXX “<Package folder>\Target\Examples\LDR\SS_App_SC598.ldr”
  
Use the following command to program the flash on ADSP-SC594 EV-SOM with Carrier Board using the pre-built SS_App_SC594.ldr loader file.
  Flash_ADSPSC59x.bat SC594 XXXX “<Package folder>\Target\Examples\LDR\SS_App_SC594.ldr”
  
Use the following command to program the flash on ADSP-21593 EV-SOM with Carrier Board using the pre-built SS_App_21593.ldr loader file.
  Flash_ADSP2159x.bat 21593 XXXX “<Package folder>\Target\Examples\LDR\SS_App_21593.ldr”
  
Use the following command to program the flash on ADSP-SC584 EZ-Board using the pre-built SS_App_SC584.ldr loader file.
  Flash_ADSPSC5xx.bat SC584 XXXX “<Package folder>\Target\Examples\LDR\SS_App_SC584.ldr”

Use the following command to program the flash on ADSP-SC589 EZ-Board using the pre-built SS_App_SC589.ldr loader file.
  Flash_ADSPSC5xx.bat SC589 XXXX “<Package folder>\Target\Examples\LDR\SS_App_SC589.ldr”
  
Use the following command to program the flash on ADSP-SC573 EZ-Board using the pre-built SS_App_SC573.ldr loader file.
  Flash_ADSPSC5xx.bat SC573 XXXX “<Package folder>\Target\Examples\LDR\SS_App_SC573.ldr”
  
Use the following command to program the flash on ADSP-21569 EZ-Board using the pre-built SS_App_21569.ldr loader file.
  Flash_ADSP2156x.bat 21569 XXXX “<Package folder>\Target\Examples\LDR\SS_App_21569.ldr”
  
Use the following command to program the flash on ADSP-21489 EZ-Board using the pre-built SS_App_21489.ldr loader file.
  Flash_ADSP214xx.bat 21469 XXXX “<Package folder>\Target\Examples\LDR\SS_App_21469.ldr”
    
**XXXX** stands for **1000** or **2000** based on the emulator (ICE-1000 or ICE-2000) used for flashing.

<note>The boot switch should be set to ‘1’ and a hard reset of the EZ-Board is required to run the application.
</note>
Analog Devices Wiki

Page Tools
