This version (04 May 2022 14:50) was approved by John Joseph.
Table of Contents
EV-SC594-SOM
Connections
EV-SC594-SOM with EV-SOM-CRR EZ-Kit Connections
Settings
The board settings for running SigmaStudio+ EV-SC594-SOM with EV-SOM-CRR EZ-Kit, using the Default Application is given in the below tables.
| Switch | Setting |
|---|---|
| SW1 | BOOT Mode Switch Default Position 0 |
Switch Settings for EV-SC594-SOM Board
| Jumper | Setting |
|---|---|
| JP1 | 2-3 connected |
Jumper Settings for EV-SC594-SOM Board
| Port | Setting |
|---|---|
| P1 | Debug port connected to ADZS-ICE-2000/ICE-1000 |
Port Settings for EV-SC594-SOM Board
| Switch | Setting |
|---|---|
| SW1 (CRR) | OFF, OFF, OFF, OFF, OFF, OFF |
Switch Settings for EV-SOM-CRR EZ-Kit
| Jumper | Setting |
|---|---|
| JP1 | Not connected |
| JP2 | Not connected |
Jumper Settings for EV-SOM-CRR EZ-Kit
| Port | Setting |
|---|---|
| P3 | Connected with SigmaStudio USBi |
| P8 | Connected to Power |
| J3(SOMCRR) – J2 (SOM) | Connected |
| J6(SOMCRR) – J1 (SOM) | Connected |
| J5(SOMCRR) – J2 (SOM) | Connected |
Port Settings for EV-SOM-CRR EZ-Kit
resources/tools-software/sigmastudiov2/gettingstarted/ev-sc594-som.txt · Last modified: 29 Apr 2022 15:20 by John Joseph