Wiki

This version (10 Nov 2022 06:27) was approved by John Joseph.The Previously approved version (10 Feb 2021 10:04) is available.Diff

Table of Contents

Return to parent page

EV-21569-SOM

Connections


EV-21569-SOM with EV-SOM-CRR EZ-Kit Connections

Settings

The board settings for running SigmaStudio+ EV-21569-SOM with EV-SOM-CRR EZ-Kit, using the Default Application is given in the below tables.

Switch Setting
SW1BOOT Mode Switch Default Position 0

Switch Settings for EV-21569-SOM Board

Jumper Setting
JP12-3 connected

Jumper Settings for EV-21569-SOM Board

Port Setting
P1Debug port connected to ADZS-ICE-2000/ICE-1000

Port Settings for EV-21569-SOM Board

Switch Setting
SW1 (CRR)OFF, OFF, OFF, OFF, OFF, OFF

Switch Settings for EV-SOM-CRR EZ-Kit

Jumper Setting
JP1Not connected
JP2Not connected

Jumper Settings for EV-SOM-CRR EZ-Kit

Port Setting
P3Connected with SigmaStudio USBi
P8Connected to Power
J3(SOMCRR) – J2 (SOM)Connected
J6(SOMCRR) – J1 (SOM)Connected
J5(SOMCRR) – J2 (SOM)Connected

Port Settings for EV-SOM-CRR EZ-Kit

resources/tools-software/sigmastudiov2/gettingstarted/ev-21569-som.txt · Last modified: 10 Nov 2022 06:27 by John Joseph