This version (10 Feb 2021 09:48) was approved by John Joseph.
Table of Contents
ADSP-SC584 EZ BOARD
Connections
ADSP-SC584 Board Connections with USBi
ADSP-SC584 Board Connections with AARDVARK
Settings
The board settings for running SigmaStudio on ADSP-SC584 EZ-BOARD, using the Default Application is given in the below tables.
| Switch | Setting |
|---|---|
| SW1 | Position 0 |
| SW6 | ON, OFF, ON, OFF, ON, OFF |
| SW7 | ON, OFF, ON, OFF, OFF, OFF |
| SW8 | OFF,OFF |
Switch Settings for ADSP-SC584 EZ-BOARD
| Jumper | Setting |
|---|---|
| JP1 | Not connected |
| JP2 | Not connected |
| JP3 | Not connected |
| JP4 | Not connected |
Jumper Settings for ADSP-SC584 EZ-BOARD
| Port | Setting |
|---|---|
| P2 | Connected with SigmaStudio USBi |
| P3 | Not connected |
| P12 | Not connected |
| P17 | Connected |
| P18 | Connected |
| P20 | Connected |
| P21 | Connected |
| P24 | Not connected |
| P25 | Pins (3,4) (5,6) (7,8) Connected |
Port Settings for ADSP-SC584 EZ-BOARD
resources/tools-software/sigmastudiov2/gettingstarted/adsp-sc584_ez-board.txt · Last modified: 10 Feb 2021 09:48 by John Joseph