This version (10 Feb 2021 09:51) was approved by John Joseph.
Table of Contents
ADSP-21569 EZ BOARD
Connections
ADSP-21569 Board Connections
Settings
The board settings for running SigmaStudio on ADSP-21569 EZ-BOARD, using the Default Application is given in the below tables.
| Switch | Setting |
|---|---|
| SW5 | ON, OFF, ON, OFF, ON, OFF |
| SW6 | ON, OFF, ON, OFF, OFF, OFF |
Switch Settings for ADSP-21569 EZ-BOARD
| Jumper | Setting |
|---|---|
| JP1 | Not connected |
| JP7 | Not connected |
| JP8 | Not connected |
Jumper Settings for ADSP-21569 EZ-BOARD
| Port | Setting |
|---|---|
| P4 | Debug port connected to ADZS-ICE-2000/ICE-1000 |
| P5 | Connected with SigmaStudio USBi |
| P10 | Connected to Power |
Port Settings for ADSP-21569 EZ-BOARD
resources/tools-software/sigmastudiov2/gettingstarted/adsp-21569_ez-board.txt · Last modified: 10 Feb 2021 09:50 by John Joseph