This version (10 Feb 2021 10:35) was approved by John Joseph.The Previously approved version (10 Feb 2021 10:34) is available.
Table of Contents
ADSP-21489 EZ-KIT Lite
Connections
ADSP-21489 EZ-KIT Board Connections
Settings
The board settings for running SigmaStudio on ADSP-21489 EZ-KIT Lite, using the Default Application is given in the below tables.
| Switch | Setting |
|---|---|
| SW1 | ON, ON, ON, ON, ON, ON, ON, ON |
| SW2 | ON, ON, ON, ON, OFF, OFF, ON, ON |
| SW3 | ON, ON, ON, ON, ON, ON, ON, ON |
| SW4 | Position 1 |
| SW7 | ON, ON, ON, ON |
| SW13 | ON, ON, OFF, ON, ON, OFF, ON, OFF |
| SW14 | ON, ON, OFF, OFF, ON, ON |
| SW15 | ON, OFF, ON, OFF, ON, OFF |
| SW16 | ON, OFF, ON, OFF, ON, OFF |
| SW17 | ON, OFF, ON, OFF, ON, OFF |
| SW18 | ON, OFF, ON, OFF, ON, OFF |
| SW24 | OFF, OFF, OFF, OFF |
| SW25 | OFF, OFF, OFF, OFF |
Switch Settings for ADSP-21489 EZ-KIT Lite
| Jumper | Setting |
|---|---|
| JP2 | OFF |
| JP5 | OFF |
Jumper Settings for ADSP-21489 EZ-KIT Lite
resources/tools-software/sigmastudiov2/gettingstarted/adsp-21489_ez-kit.txt · Last modified: 10 Feb 2021 10:35 by John Joseph