This version (30 Jul 2012 22:13) was approved by Brett Gildersleeve.The Previously approved version (30 Jul 2012 22:12) is available.
Table of Contents
Mixers/Splitters Examples
Example 1
This schematic shows a straightforward way of using a Three-Input Cross-Mixer to combine three sources — two White Noise (one passed through a Pinking Filter) and a tone source — and run their mixed output through a Mid EQ and finally through a Single-Control Splitter to produce two (same-gain) Outputs.
Example 2
This schematic shows a straightforward way of using a Signal Merger grown by 1 to combine two Tone and one White Noise sources and feed a Single-Control Splitter grown by 1, producing three Output blocks, their gain set by the splitter knob setting plus parameter values.
resources/tools-software/sigmastudio/tutorials/mixerssplittersexamples.txt · Last modified: 30 Jul 2012 22:13 by Brett Gildersleeve