Wiki

This version (15 Nov 2012 19:16) was approved by William Jahn.The Previously approved version (19 Jun 2012 17:49) is available.Diff

This is an old revision of the document!


Hierarchy Input

Click here to return to the System page

The Hierarchy input block is used to create signal inputs into a Schematic Hierarchy Tab. Hierarchy Boards are helpful for large schematic designs and for organizing design components.



For more information about Hierarchy Boards, see the Hierarchy Boards topic.

To create a Hierarchy Input:

  • Select a hierarchy board tab at the bottom of the Schematic window.
  • Drag a Hierarchy Input block into the schematic.
  • This will create a Hierarchy Input block in the schematic and a corresponding input pin on the Hierarchy Board block.


Note: To see determine which Hierarchy input block belongs to a Hierarchy board input pin, hover the mouse pointer above the Hierarchy board pin and the input block's name will be displayed in the tool-tip (as in the image above).

See the Hierarchy Board System Example for a sample hierarchy board design.

/srv/wiki.analog.com/data/pages/resources/tools-software/sigmastudio/toolbox/systemschematicdesign/hierarchyinput.txt · Last modified: 03 Jan 2013 20:42 by 127.0.0.1