This is an old revision of the document!
The Square Wave block generates a square wave at a constant level and frequency. The output frequency is adjustable. Use the edit control or arrows to set the desired frequency; the checkbox control turns the signal on and off.
To change the source's Sampling Rate, Right-click in the block and select Set Sampling Rate, which will open the Sampling Rate window (default is 44.1 kHz).
|GUI Control Name||Default Value||Range||Function Description|
|on/off||off||on/off||Turns the output of the cell on or off. When the output is off, the output pin will output a constant value of 0.|
|Frequency||500.01||0.01 to 0.5*Sample Rate||The sets the frequency of the square wave that is output from the cell.|
|Initial Phase||0||0 to 360||Initial Phase of the square wave.|
|Gain||0||-144 to 42 dB||The gain to be multiplied on the square wave|