The information here is preliminary.
Click here to return to the SigmaStudio Algorithm Resource Summary section.
Category | Algorithm | Executed Instructions | Program RAM | DATA Ram | Parameter RAM | Description | Processors | ||
---|---|---|---|---|---|---|---|---|---|
State Machine | State Machine | 15 | 15 | 2 | 2 | Outputs the input signal from the green pin, if and only if the control signal level (orange pin) falls within the range specified in the numerical spin controls (>) and (<). | ADAU144x, ADAU176x, ADAU1781 | ||
State Machine | State Machine (Grow) | 15 | 15 | 1 | 2 | Adds another channel for an State Machine algorithm to the block. | ADAU144x, ADAU176x, ADAU1781 | ||
Demultiplexers | Mono | Index Selectable Demutiplexer | 12 | 12 | 4 | 0 | Lets you route an input to one of two selectable output pins. | ADAU144x, ADAU176x, ADAU1781 | |
Demultiplexers | Mono | Index Selectable Demutiplexer (Grow) | 4 | 4 | 4 | 0 | Adds another output to the block. | ADAU144x, ADAU176x, ADAU1781 | |
Demultiplexers | Stereo | Index Selectable Demutiplexer | 24 | 24 | 8 | 0 | Lets you route an input to one of two selectable output pins. | ADAU144x, ADAU176x, ADAU1781 | |
Demultiplexers | Stereo | Index Selectable Demutiplexer (Grow) | 8 | 8 | 4 | 0 | Adds another output to the block. | ADAU144x, ADAU176x, ADAU1781 | |
Demultiplexers | No Slew | Mono Switch 1xn | 4 | 4 | 2 | 2 | Routes an input signal to one of many possible outputs. The strip of radio buttons is used to select an output (each radio button corresponds to a coefficient RAM parameter). | ADAU144x, ADAU176x, ADAU1781 | |
Demultiplexers | No Slew | Mono Switch 1xn (Grow) | 2 | 2 | 1 | 1 | Adds another output and corresponding switch to the block. | ADAU144x, ADAU176x, ADAU1781 | |
Demultiplexers | No Slew | Stereo Switch 2xn | 8 | 8 | 4 | 2 | Route a stereo input to one of several possible stereo outputs with this block, using the strip of radio button pairs to select which output. | ADAU144x, ADAU176x, ADAU1781 | |
Demultiplexers | No Slew | Stereo Switch 2xn (Grow) | 4 | 4 | 2 | 1 | Adds another two outputs (stereo pair) and corresponding switch to the block. | ADAU144x, ADAU176x, ADAU1781 | |
Demultiplexers | Clickless SW Slew | Mono Switch 1xn | 22 | 22 | 11 | 2 | Routes an input signal to one of many possible outputs, the strip of radio buttons is used to select an output (each radio button corresponds to a coefficient RAM parameter). | ADAU144x, ADAU176x, ADAU1781 | |
Demultiplexers | Clickless SW Slew | Mono Switch 1xn (Grow) | 11 | 11 | 5 | 1 | Adds another output and corresponding switch to the block. | ADAU144x, ADAU176x, ADAU1781 | |
Demultiplexers | Clickless SW Slew | Stereo Switch 2xn | 26 | 26 | 13 | 2 | Route a stereo input to one of several possible stereo outputs with this block, using the strip of radio button pairs to select which output. | ADAU144x, ADAU176x, ADAU1781 | |
Demultiplexers | Clickless SW Slew | Stereo Switch 2xn (Grow) | 13 | 13 | 6 | 1 | Adds another two outputs (stereo pair) and corresponding switch to the block. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | Mono | Index Selectable Multiplexer | 10 | 10 | 3 | 0 | Routes the signal from either of its two input pins, based on the control signal input index value from the Index Lookup Table, RMS Table or DC Input. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | Mono | Index Selectable Multiplexer (Grow) | 2 | 2 | 1 | 0 | Adds another input to the multiplexer. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | Stereo | Index Selectable Multiplexer | 18 | 18 | 7 | 0 | Routes the signal from either of its two input pins, based on the control signal input index value from the Index Lookup Table, RMS Table or DC Input. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | Stereo | Index Selectable Multiplexer (Grow) | 4 | 4 | 2 | 0 | Adds another two inputs (stereo pair) to the multiplexer. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | Index Selectable Slewing Mux | 60 | 60 | 19 | 2 | Routes any one of its inputs, based on the index value from the Index Lookup Table, RMS Table or DC input, letting you ramp the source level up and down without any clicking noises when switching inputs. | ADAU144x, ADAU176x, ADAU1781 | ||
Multiplexer | Index Selectable Slewing Mux (Grow) | 2 | 2 | 1 | 0 | Adds another input to the multiplexer. | ADAU144x, ADAU176x, ADAU1781 | ||
Multiplexer | No Slew | Mono Switch Nx1 | 3 | 3 | 1 | 2 | Routes one of many possible input signals to the output. The strip of radio buttons is used to select the input signal (each radio button corresponds to a coefficient RAM parameter). | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | No Slew | Mono Switch Nx1 (Grow) | 1 | 1 | 0 | 1 | Adds another input and corresponding switch to the block. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | No Slew | Stereo Switch Nx2 | 6 | 6 | 2 | 2 | Select between or among sets of stereo inputs and send one set to one of the (2-channel) outputs. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | No Slew | Stereo Switch Nx2 (Grow) | 2 | 2 | 1 | 1 | Adds another two inputs (stereo pair) and corresponding switch to the block. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | No Slew | Multi CH Switch Nx4 | 12 | 12 | 4 | 2 | Select among sets of 4 inputs and send one set to one of the (4-channel) outputs. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | No Slew | Multi CH Switch Nx4 (Grow) | 4 | 4 | 0 | 1 | Adds another 4 inputs as well as a corresponding switch to the block. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | No Slew | Multi CH Switch Nx6 | 18 | 18 | 6 | 2 | Select among sets of 6 inputs and send one set to one of the (6-channel) outputs. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | No Slew | Multi CH Switch Nx6 (Grow) | 6 | 6 | 0 | 1 | Adds another 6 inputs as well as a corresponding switch to the block. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | No Slew | Multi CH Switch Nx8 | 24 | 24 | 8 | 2 | Select among sets of 8 inputs and send one set to one of the (8-channel) outputs. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | No Slew | Multi CH Switch Nx8 (Grow) | 8 | 8 | 0 | 1 | Adds another 8 inputs as well as a corresponding switch to the block. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | Clickless SW Slew | Mono Switch Nx1 | 60 | 60 | 19 | 1 | Routes one of many possible input signals to the output. The strip of radio buttons is used to select the input signal (each radio button corresponds to a coefficient RAM parameter). | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | Clickless SW Slew | Mono Switch Nx1 (Grow) | 2 | 2 | 1 | 0 | Adds another input and corresponding switch to the block. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | Clickless SW Slew | Stereo Switch Nx2 | 69 | 69 | 22 | 1 | Select between or among sets of stereo inputs and send one set to one of the (2-channel) outputs. | ADAU144x, ADAU176x, ADAU1781 | |
Multiplexer | Clickless SW Slew | Stereo Switch Nx2 (Grow) | 73 | 73 | 24 | 1 | Adds another two inputs (stereo pair) and corresponding switch to the block. | ADAU144x, ADAU176x, ADAU1781 | |
Cross Fade | Crossfade (Data Controlled) | 16 | 16 | 7 | 1 | Creates a smooth transition between two input signals: the volume of one signal is decreased while the other input signal level increases, creating a gradual switch (cross-fade) between the inputs. | ADAU144x, ADAU176x, ADAU1781 | ||
Cross Fade | Crossfade (Data Controlled) (Grow) | 5 | 5 | 1 | 0 | Adds another two inputs to the block. | ADAU144x, ADAU176x, ADAU1781 |