This version (02 Jan 2023 14:03) was approved by Jagan M.
Table of Contents
Cross Mux
Description
The Cross Mux block allows route an input to one of selected output pins. The output for each input is selected based on the numeric value on the control.
Targets Supported
| Name | ADSP-214xx | ADSP-215xx/SC5xx | ADAU145x/146x |
|---|---|---|---|
| Cross Mux | Block | Block | NA |
Pins
Input
| Name | Type | Description |
|---|---|---|
| InputX | Audio | Input Channel X |
Output
| Name | Type | Description |
|---|---|---|
| OutputX | Audio | Output Channel X |
Note:
- X - Channel Index
Configurable Parameters
| GUI Parameter | Default Value | Range | Function Description |
|---|---|---|---|
| Index_ChannelX | 0 | 0 to 100 | Selects the output channel to route the input |
| NumInputs | 1 | 1 to 23 | Number of input channels. Change in this value requires re-compilation |
| NumOuputs | 1 | 1 to 23 | Number of output channels. Change in this value requires re-compilation |
Note:
- X - Channel Index
DSP Parameters
| Parameter Name | Description | ADSP-214xx/SC5xx/215xx | ADAU145x/146x |
|---|---|---|---|
| Index_ChannelX | Selects the output channel to route the input | Float | NA |
Note:
- X - Channel Index
resources/tools-software/sigmastudio/toolbox/muxesdemuxes/crossmux.txt · Last modified: 28 Apr 2022 15:43 by Jagan M