This version (06 Aug 2012 22:49) was approved by Brett Gildersleeve.

General-Purpose Output

Click here to return to the Inputs and Outputs Toolbox page.

The General Purpose Output block routes a signal to the hardware's GPIO output. Each block is linked to one output channel.

Note: The block is only available for DSPs that include GPIO. To configure the hardware's GPIO input and outputs settings, see the processors Register Control Window.

Use the drop-down to select the hardware GPIO output that is assigned to the block.

Observe that as you drag more blocks to your schematic, your number of output channels available in the drop-down list decreases.

resources/tools-software/sigmastudio/toolbox/io/generalpurposeoutput.txt · Last modified: 06 Aug 2012 22:49 by Brett Gildersleeve