Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.

===== Block T Connection ======
\\
[[resources:tools-software:sigmastudio:toolbox:basicdsp|Click here to return to the Basic DSP page]]
\\
Block T connection takes the Block of real signals as input and pass the signal to each Output Pin. 
\\
{{ :resources:tools-software:sigmastudio:toolbox:basicdsp:blocktconnection.png?direct |}}
\\
====Input Pins====
^Name^Format [int/dec] - [control/audio]^Function Description^
|Pin 0: Input Signal  |audio |  input signal|
\\
====Output Pins====
^Name^Format [int/dec] - [control/audio]^Function Description^
|Pin 1: Output Signal| audio |  Output signal is pass trough of input signal|
\\
====Grow Algorithm====
Grow algorithm supported for Output pins up to 8 channels. 
\\
{{ :resources:tools-software:sigmastudio:toolbox:basicdsp:blocktconnectiongrowth.png?direct |}}
\\
====Add Algorithm====
Add algorithm supported for the module. 
\\
====Supported DSPs=====
IDspSigma300 (Block Schematic only)
\\

Analog Devices Wiki

Page Tools