This version (15 Sep 2017 11:46) was approved by Sanjeeva Reddy.
Table of Contents
Block T Connection
Click here to return to the Basic DSP page
Block T connection takes the Block of real signals as input and pass the signal to each Output Pin.
Input Pins
| Name | Format [int/dec] - [control/audio] | Function Description |
|---|---|---|
| Pin 0: Input Signal | audio | input signal |
Output Pins
| Name | Format [int/dec] - [control/audio] | Function Description |
|---|---|---|
| Pin 1: Output Signal | audio | Output signal is pass trough of input signal |
Grow Algorithm
Grow algorithm supported for Output pins up to 8 channels.
Add Algorithm
Add algorithm supported for the module.
Supported DSPs
IDspSigma300 (Block Schematic only)
resources/tools-software/sigmastudio/toolbox/basicdsp/tconnection.txt · Last modified: 15 Sep 2017 11:46 by Sanjeeva Reddy