Differences

This shows you the differences between two versions of the page.

--- resources:tools-software:sigmastudio:toolbox:basicdsp:parameterupdate [11 Aug 2016 11:50]
Anil Ghadiya [Parameter Update]
+++ resources:tools-software:sigmastudio:toolbox:basicdsp:parameterupdate [03 Jun 2020 11:48]
Venkatesan Krishnamoorthy minor correction
@@ Line 38: / Line 38: @@
 \\
 \\
+==== Parameter Selection for ADSP-SC5XX/ADSP-215xx====
+After adding the module. Press 'Link compile connect' once to ensure all the addresses are proper. Then click on the select button to open the following window.
+\\
+{{ :resources:tools-software:sigmastudio:toolbox:basicdsp:paramreadwnd.jpg?nolink |}}
+\\
+^GUI Control Name^     Default Value    ^    Range    ^Function Description^
+|Block Name| Not Applicable|Not Applicable|Name of the module in the schematic|
+|Parameter Name|Not Applicable| Not Applicable|Name of the parameter in the selected module.|
+|Address|0| Not Applicable|Address of the parameter. If the user wants to enter the address directly click on the checkbox and change it|
+|Offset|0| Not Applicable |This offset is added to the address, then that is used as the address to read the parameter from |
+|Data Type| float |float/int  |Data type of the parameter.|
+\\
+\\

Wiki