This version (03 Jun 2020 11:47) was approved by Venkatesan Krishnamoorthy.The Previously approved version (03 Jun 2020 11:43) is available.Diff

Parameter Read

Click here to return to the Basic DSP.

This module can be used to read any parameter in the schematic and get the value in the output pin.

Input Pins


Output Pins

NameFormat [int/dec] - [control/audio]Function Description
Pin 0: Outputfloat- controlRead parameter value is sent as float value

Grow Algorithm

Not supported


After adding the module. Press 'Link compile connect' once to ensure all the addresses are proper. Then click on the select button to open the following window.

GUI Control Name Default Value Range Function Description
Block Name Not ApplicableNot ApplicableName of the module in the schematic
Parameter NameNot Applicable Not ApplicableName of the parameter in the selected module.
Address0 Not ApplicableAddress of the parameter. If the user wants to enter the address directly click on the checkbox and change it
Offset0 Not Applicable This offset is added to the address, then that is used as the address to read the parameter from
Data Type float float/int Data type of the parameter.

DSP Parameter Information

GUI Control NameCompiler NameFunction Description
AddressParamReadAlg1AddressAddress of the parameter
offsetParamReadAlg1OffsetOffeset from address
typeParamReadAlg1Type0 - float, 1- int


  • Green - Algorithm Name
  • Red - Instance Number (Changes for each instance)
  • Blue - Parameter Name

Supported ICs

  1. SC5xx
resources/tools-software/sigmastudio/toolbox/basicdsp/parameterread.txt · Last modified: 03 Jun 2020 11:47 by Venkatesan Krishnamoorthy