Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.
====== DSP Parameter Read ======
[[:resources:tools-software:sigmastudio:toolbox:basicdsp|Click here to return to the Basic DSP section.]]\\
||
This module can be used to read any parameter/array of parameter values from schematic. Also it can write the read values to the file periodically.

{{ :resources:tools-software:sigmastudio:toolbox:basicdsp:dspparamread.jpg?nolink |}}

===== Input Pins =====
None
\\
===== Output Pins =====
None
\\

===== Grow Algorithm =====
The module currently does not support grow/add functionality.
\\
\\
===== Configurations =====
The DSP param readback module contains controls to initiate single read/continuous read.
{{ :resources:tools-software:sigmastudio:toolbox:basicdsp:dspparamcell.jpg?nolink |}}
^GUI Control Name^Default Value^Range^Function Description^
|Read Button|-| - |Click on this button to initiate single read.|
|Continuous Read Circle|-| - |Click on this circle to initiate continious read. This will be visible only if the continuous read is enabled in the readback configuration|

After Link Compile Download right click on the module then select 'Configure...' to configure the parameter read options. After configuring, press read button/continuous read circle to initiate the read. 
\\
{{ :resources:tools-software:sigmastudio:toolbox:basicdsp:dspparamreadcontext.jpg?nolink |}}
\\
{{ :resources:tools-software:sigmastudio:toolbox:basicdsp:dspparamreadform.jpg?nolink |}}
\\
^GUI Control Name^Default Value^Range^Function Description^
|Block Name|-| All the modules name in the current schematic |Lists all the modules in the current schematic.|
|Parameter Name|-| All the parameter in the module selected in 'Block Name' field. | Lists all the parameter in the module selected in 'Block Name' field.|
|Address Enable Checkbox|Not Checked| Checked/Not Checked| Enables the address field editable. When address field is editable 'Block Name' and 'Parameter Name' fields can not be edited.|
|Address|-|-|Address from which the data to be read from the target.|
|Parameter Length|1|1-65536|Number of values to be read from the parameter Address.|
|Enable Continuous Read Back Checkbox|Not Checked|Checked/Not Checked|Enables the continuous readback button in the module|
|Readback Period|500 ms|500 - 2000 ms|Period at which read back to be initiated in continuous reaback mode|
|Output File Enable Checkbox|Not Checked| Checked/Not Checked|Enables the output file write option.|
|Output File |-|-|File to which the data to be written.|
|File Write Duration|1|1-5| Duration for which file write operation occurs.|


**Notes:** 
    * Output file write is supported only if the continuous read is enabled.
    * Once the file write is completed the continuous read will be stopped.
    * Any change in the schematic requires a new Link compile download for the updated parameters to appear in the configuration window. 

===== Supported ICs =====
  - ADAU145x
  - 213xx
  - 214xx
  - SC5xx
Analog Devices Wiki

Page Tools
