Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

resources:tools-software:sigmastudio:developmentenvironment:hardware_windows:e2promwindow [15 Jun 2012 15:10] – created William Jahnresources:tools-software:sigmastudio:developmentenvironment:hardware_windows:e2promwindow [15 Jun 2012 15:11] (current) – updated picture formatting William Jahn
Line 12: Line 12:
  
   - To use the E2Prom, insert the E2Prom IC block into [[resources/tools-software/sigmastudio/developmentenvironment/hardwareconfigurationtab|Hardware Configuration Tab]] and connect it to the USB communication channel block as show in the figure below.   - To use the E2Prom, insert the E2Prom IC block into [[resources/tools-software/sigmastudio/developmentenvironment/hardwareconfigurationtab|Hardware Configuration Tab]] and connect it to the USB communication channel block as show in the figure below.
-    - {{e2prompic1.png}} +    - {{ e2prompic1.png }} 
   - Compile/Link/Download the project and verify that "Ready - Download" is displayed on the status bar.   - Compile/Link/Download the project and verify that "Ready - Download" is displayed on the status bar.
   - To download the compiled project's program data to the E2Prom, Right-Click on the DSP block in the Hardware Configuration window and select** Write Latest Compilation to E2PROM** from the menu. Note if your E2Prom's size differs from the default 16kB size, you should first adjust the size setting in the Read/Write window (see below) before writing .   - To download the compiled project's program data to the E2Prom, Right-Click on the DSP block in the Hardware Configuration window and select** Write Latest Compilation to E2PROM** from the menu. Note if your E2Prom's size differs from the default 16kB size, you should first adjust the size setting in the Read/Write window (see below) before writing .
-    - {{e2prompic2.png}} +    - {{ e2prompic2.png }} 
   - If your hardware is setup correctly, you should see the Download E2Prom progress dialog.   - If your hardware is setup correctly, you should see the Download E2Prom progress dialog.
-    - {{e2prompic3.png}}+    - {{ e2prompic3.png }}
  
 -------------------------------------------------------------------------------- --------------------------------------------------------------------------------
Line 25: Line 25:
 To open the E2Prom Read/Write window, Click the WinE2PromLoader tab at the bottom of the Hardware Configuration window or Right-click on the E2Prom IC block and select Read/Write Window from the menu. To open the E2Prom Read/Write window, Click the WinE2PromLoader tab at the bottom of the Hardware Configuration window or Right-click on the E2Prom IC block and select Read/Write Window from the menu.
 \\ \\
-{{e2prompic5.png}} +{{ e2prompic5.png }} 
 \\ \\
 \\ \\
resources/tools-software/sigmastudio/developmentenvironment/hardware_windows/e2promwindow.txt · Last modified: 15 Jun 2012 15:11 by William Jahn