Differences

This shows you the differences between two versions of the page.

--- resources:tools-software:sharc-audio-module:baremetal:project-wizard [14 Nov 2018 02:47] – [Bare Metal Project Wizard] Chad Wentworth
+++ resources:tools-software:sharc-audio-module:baremetal:project-wizard [01 Feb 2022 15:29] (current) – [Bare Metal Project Wizard] Chad Wentworth
@@ Line 1: / Line 1: @@
 ===== Bare Metal Project Wizard ======
-<WRAP 65% tip>
-Helpful video: [[https://www.analog.com/en/education/education-library/videos/5858373742001.html|Installing and Configuring the Bare Metal Framework]]
-</WRAP>
 The SHARC Audio Module Bare Metal Project wizard allows you to create a new project configuration for your SHARC Audio Module.
+{{youtube>GprhlU-IrXQ?medium}}
 To begin, open the wizard by selecting **File → New → SHARC Audio Module Bare Metal Project** from the pull-down menu. The **General Project Information** page will appear. This is where a name is given to the new project. Then click Next.
+<WRAP round 80% important>
+If the Bare Metal Framework Wizard does not currently show in CCES under **File → New → SHARC Audio Module Bare Metal Project** does not show, try clicking **File → New → Other** and it should show under the C/C++ tab. This is normally a result of installing a new version of CCES after the Bare Metal Framework has been installed.
+</WRAP>
 ==== General Project Information Page =====
 {{:resources:tools-software:sharc-audio-module:bm_wizard_start.gif?nolink&600|}}

Wiki