Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
resources:tools-software:linuxdsp:docs:linux-kernel-and-drivers:mtd:mtd [24 Sep 2020 05:29] – [Hardware Setup] cathy fangresources:tools-software:linuxdsp:docs:linux-kernel-and-drivers:mtd:mtd [24 Sep 2020 05:39] (current) – [Configure Linux Kernel] cathy fang
Line 23: Line 23:
 ===== Software Configuration ===== ===== Software Configuration =====
 ==== Configure Linux Kernel ==== ==== Configure Linux Kernel ====
-The following configuration should be done on top of the SC589-ezkit/SC584-ezkit/SC573-ezkit default configuration.+The following configuration should be done on top of the SC589-ezkit/SC584-ezkit/SC573-ezkit/SC589-mini default configuration.
 Run bitbake linux-adi -c menuconfig and configure the kernel as follows: Run bitbake linux-adi -c menuconfig and configure the kernel as follows:
 Enable MTD and SPI NOR flash w25x driver.  Enable MTD and SPI NOR flash w25x driver. 
resources/tools-software/linuxdsp/docs/linux-kernel-and-drivers/mtd/mtd.txt · Last modified: 24 Sep 2020 05:39 by cathy fang