This version (11 Jan 2021 19:44) was approved by Robin Getz.The Previously approved version (08 Jan 2021 22:30) is available.Diff

Linux for ADSP-SC5xx Processors

Welcome to Linux for ADSP-SC5xx. This collection of pages contains all you need to know in order to download, build, develop and install Linux, running on the ARM core of the ADSP-SC5xx family of processors. This new version of Linux is Yocto based and replaced the Linux Add-In for CrossCore Embedded Studio.

Release Status

The 1.0.0 release of Yocto Linux for ADSP-SC5xx processors is now released.

Supported Processors and Environment

The following EZ-KIT development boards are supported by Linux for ADSP-SC5xx:

Development Board Supported Revision
ADSP-SC589 EZ-KIT 2.0 or later
ADSP-SC584 EZ-KIT 2.0 or later
ADSP-SC573 EZ-KIT 2.0 or later
ADSP-SC589-MINI 1.5 or later

Building of the Linux software requires a host PC running a recent flavour Linux. Analog Devices uses 64-bit Ubuntu 18.04 LTS for its building and testing of Linux for ADSP-SC5xx. If you are new to Linux development we strongly recommend using a host PC with this installation of Linux. If you are confident in resolving variant specific problems feel free to use your favourite distro.

Getting Started

Documentation, Help and Frequently Asked Questions

Help for this product can be found on the Linux for ADSP Processors Engineer Zone forum.

For a summary of the most common questions and answers related to Linux for ADSP-SC5xx see the frequently asked questions.

For all documentation see the documentation for this product.

Release Notes and Licensing

Release Notes for the 1.0.0 release can be found on the release notes.

Licensing Information for the Yocto Linux for ADSP-SC5xx Processors product can be found on the licensing page.

resources/tools-software/linuxdsp.txt · Last modified: 11 Jan 2021 19:44 by Robin Getz