Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
resources:tools-software:linux-software:libiio:clients:lte_example [22 Nov 2016 20:53] – edit the structure Di Puresources:tools-software:linux-software:libiio:clients:lte_example [24 Feb 2020 23:07] – [Using File I/O] Robin Getz
Line 77: Line 77:
  
 We will provide a few more pointers. We will provide a few more pointers.
-  * [[http://www.etsi.org/deliver/etsi_ts/136100_136199/136141/12.05.00_60/ts_136141v120500p.pdf|ETSI TS 136 141 Specification]] The MathWorks documentation talks about the "test model number", as having options of '1.1', '1.2', '2', '3.1', '3.2', and '3.3'. These numbers are the [[wp>E-UTRA|E-UTRA]] Test Model numbers, and are referenced as ''E-TMn.n'' in section 6 of the pdf. Care should be taken to ensure that the proper test waveform is generated for the proper tests. (i.e. E-UTRA Test Models 1.1 & 1.2 should not be used for EVM testing).+  * [[http://www.etsi.org/deliver/etsi_ts/136100_136199/136141/12.05.00_60/ts_136141v120500p.pdf|ETSI TS 136 141 Specification v12]] or [[https://www.etsi.org/deliver/etsi_ts/136100_136199/136141/15.03.00_60/ts_136141v150300p.pdf|ETSI TS 136 141 Specification v15]].  
 +    * The MathWorks documentation talks about the "test model number", as having options of '1.1', '1.2', '2', '3.1', '3.2', and '3.3'. These numbers are the [[wp>E-UTRA|E-UTRA]] Test Model numbers, and are referenced as ''E-TMn.n'' in section 6 of the pdf. Care should be taken to ensure that the proper test waveform is generated for the proper tests. (i.e. E-UTRA Test Models 1.1 & 1.2 should not be used for EVM testing).
  
 Launch the tool to generate an E-UTRA Test Model (E-TM) waveform. In this case, we will generated a waveform for a few different tests. Launch the tool to generate an E-UTRA Test Model (E-TM) waveform. In this case, we will generated a waveform for a few different tests.
-  * EVM for 64QAM modulation (E-UTRA Test Model 3.1) +  * EVM for 64QAM modulation at max power (E-UTRA Test Model 3.1) 
-  * EVM for 16QAM modulation (E-UTRA Test Model 3.2) +  * EVM for 256QAM modulation at max power (E-UTRA Test Model 3.1a) 
-  * EVM for QPSK modulation  (E-UTRA Test Model 3.3)+  * EVM for 1024QAM modulation at max power (E-UTRA Test Model 3.1b)  
 +  * EVM for 16QAM modulation at max power (E-UTRA Test Model 3.2) 
 +  * EVM for QPSK modulation  at max power (E-UTRA Test Model 3.3)
 All should be generated for 20MHz, FDD, and we change the output variable three times (''QAM64'', ''QAM16'' and ''QPSK''). All should be generated for 20MHz, FDD, and we change the output variable three times (''QAM64'', ''QAM16'' and ''QPSK'').
  
resources/tools-software/linux-software/libiio/clients/lte_example.txt · Last modified: 20 Jul 2021 00:46 by Travis Collins

Page Tools