Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
resources:tools-software:linux-software:libiio:clients:beacon_frame_receiver_simulink [14 Feb 2021 05:20] – fix links Robin Getzresources:tools-software:linux-software:libiio:clients:beacon_frame_receiver_simulink [14 Feb 2021 20:11] (current) – fix links Robin Getz
Line 3: Line 3:
 {{page>/wiki/common#retired&nofooter&noheader}} {{page>/wiki/common#retired&nofooter&noheader}}
  
-In this section, we will show an IEEE 802.11b beacon frame receiver example. In this example, FMCOMMS2 is used as RF front-end, which captures the WiFi signals over the air. These signals are then streamed from target to Simulink via the iio_sys_obj block. The Simulink model is shown in the figure below, where the Receiver and PLCP Display are from an existing Simulink example [[mw>help/wlan/ug/802-11-ofdm-beacon-receiver-with-usrp-hardware.html|IEEE 802.11 WLAN - Beacon Frame Receiver with USRP® Hardware]]. This Simulink model will decode the received WiFi signals, and display all the information from the beacon frame.+In this section, we will show an IEEE 802.11b beacon frame receiver example. In this example, FMCOMMS2 is used as RF front-end, which captures the WiFi signals over the air. These signals are then streamed from target to Simulink via the iio_sys_obj block. The Simulink model is shown in the figure below, where the Receiver and PLCP Display are from an existing Simulink example [[mw>help/supportpkg/usrpradio/ug/ieee-802-11-tm-wlan-ofdm-beacon-receiver-with-usrp-r-hardware.html|IEEE 802.11 WLAN - Beacon Frame Receiver with USRP® Hardware]]. This Simulink model will decode the received WiFi signals, and display all the information from the beacon frame.
  
 <WRAP round info> <WRAP round info>
Line 18: Line 18:
   * [[https://github.com/analogdevicesinc/MathWorks_tools/tree/3.1/hil_models/ieee80211_beacon_rx|IEEE 802.11 Beacon Frame Receiver Model]]   * [[https://github.com/analogdevicesinc/MathWorks_tools/tree/3.1/hil_models/ieee80211_beacon_rx|IEEE 802.11 Beacon Frame Receiver Model]]
 </WRAP> </WRAP>
-Its initialization functions are based on the ones of [[http://uk.mathworks.com/help/supportpkg/usrpradio/examples/ieee-802-11-wlan-beacon-frame-receiver-with-usrp-r-hardware.html|IEEE 802.11 WLAN - Beacon Frame Receiver with USRP® Hardware]]. +Its initialization functions are based on the ones of [[mw>help/supportpkg/usrpradio/ug/ieee-802-11-tm-wlan-ofdm-beacon-receiver-with-usrp-r-hardware.html|IEEE 802.11 WLAN - Beacon Frame Receiver with USRP® Hardware]]. 
  
  
resources/tools-software/linux-software/libiio/clients/beacon_frame_receiver_simulink.txt · Last modified: 14 Feb 2021 20:11 by Robin Getz

Page Tools