Wiki

Analog Devices Wiki

English
English
简体中文
简体中文
日本語
日本語
Руccкий
Руccкий

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
resources:tools-software:linux-drivers:iio-pll:adf5355 [25 Mar 2021 12:38] – [Supported Devices] Michael Hennerichresources:tools-software:linux-drivers:iio-pll:adf5355 [25 Mar 2021 12:52] (current) – [Devicetree bindings] Michael Hennerich
Line 12: Line 12:
 ===== Evaluation Boards ===== ===== Evaluation Boards =====
  
-  * [[adi>EV-ADF5355SD1Z|ADF5355 Eval Board]] +  * [[adi>EVAL-ADF4355|ADF4355 Eval Board]] 
-  * [[adi>EV-ADF4355-2SD1Z|ADF4355-2 Eval Board]]+  * [[adi>EVAL-ADF5355|ADF5355 Eval Board]] 
 +  * [[adi>EVAL-ADF5356|ADF5356 Eval Board]] 
      
 ===== Description ===== ===== Description =====
Line 117: Line 119:
  - compatible: Should be one of  - compatible: Should be one of
  * "adi,adf5355": When using the ADF5355 device  * "adi,adf5355": When using the ADF5355 device
 + * "adi,adf5356": When using the ADF5356 device
 + * "adi,adf4355": When using the ADF4355 device
  * "adi,adf4355-2": When using the ADF4355-2 device  * "adi,adf4355-2": When using the ADF4355-2 device
 + * "adi,adf4355-3": When using the ADF4355-3 device
  - reg: SPI chip select numbert for the device  - reg: SPI chip select numbert for the device
  - spi-max-frequency: Max SPI frequency to use (< 20000000)  - spi-max-frequency: Max SPI frequency to use (< 20000000)
Line 181: Line 186:
 <code> <code>
 Example: Example:
- adf5355@0 { + 
- compatible = "adf5355"; +&spi0 { 
- reg = <0>; + status = "okay"; 
- spi-max-frequency = <1000000>; + 
- clocks = <&adf4351_clkin>; + adf5355@0 { 
- clock-names = "clkin"; + compatible = "adf5355"; 
- clock-output-names = "adf5355_out"; + reg = <0>; 
- adi,charge-pump-current = <900>; + spi-max-frequency = <1000000>; 
- adi,muxout-select = <6>; + clocks = <&adf4351_clkin>; 
- adi,mute-till-lock-enable; + clock-names = "clkin"; 
- adi,output-a-power = <2>; + clock-output-names = "adf5355_out"; 
- adi,output-b-power = <2>; + adi,charge-pump-current = <900>; 
- adi,output-b-enable; + adi,muxout-select = <6>; 
- adi,output-a-enable; + adi,mute-till-lock-enable; 
- adi,charge-pump-negative-bleed-enable; + adi,output-a-power = <2>; 
- adi,reference-differential-input-enable; + adi,output-b-power = <2>; 
- adi,muxout-level-3v3-enable; + adi,output-b-enable; 
- adi,power-up-frequency = /bits/ 64 <123000000>; + adi,output-a-enable; 
- };+ adi,charge-pump-negative-bleed-enable; 
 + adi,reference-differential-input-enable; 
 + adi,muxout-level-3v3-enable; 
 + adi,power-up-frequency = /bits/ 64 <123000000>; 
 + }; 
 + 
 + adf5356@1 { 
 + #clock-cells = <0>; 
 + compatible = "adi,adf5356"; 
 + reg = <1>; 
 + spi-max-frequency = <1000000>; 
 + clocks = <&ad9361_clkin>; 
 + clock-names = "clkin"; 
 + clock-output-names = "ADF5356"; 
 + adi,charge-pump-current = <900>; 
 + adi,muxout-select = <6>; 
 +                adi,muxout-level-3v3-enable; 
 + adi,mute-till-lock-enable; 
 + adi,output-a-power = <3>; 
 + adi,output-b-power = <0>; 
 + adi,charge-pump-negative-bleed-enable; 
 + adi,reference-differential-input-enable; 
 + adi,power-up-frequency = /bits/ 64 <1500000000>; 
 + adi,output-a-enable; 
 + adi,clock-shift = <2>; 
 +                adi,reference-div2-enable; 
 +                adi,reference-div-factor = <1>; 
 + }; 
 +};
 </code> </code>
  
resources/tools-software/linux-drivers/iio-pll/adf5355.txt · Last modified: 25 Mar 2021 12:52 by Michael Hennerich

Page Tools