Differences

This shows you the differences between two versions of the page.

--- resources:tools-software:linux-drivers:iio-pll:ad9528 [24 May 2019 10:17] – [Description] Michael Hennerich
+++ resources:tools-software:linux-drivers:iio-pll:ad9528 [24 May 2019 14:55] (current) – [Device tree example] Michael Hennerich
@@ Line 96: / Line 96: @@
   * **adi,sysref-k-div**: SYSREF Pattern Generator K divider
   * **adi,pll2-charge-pump-current-nA**: Magnitude of PLL2 charge pump current (nA)
-  * **adi,pll2-ndiv-a-cnt**: PLL2 Feedback N divider, counter A (range 0..4)
+  * **adi,pll2-m1-frequency**: Distribution clock frequency (can skip, adi,pll2-freq-doubler-enable, adi,pll2-n2-div, adi,pll2-r1-div, adi,pll2-vco-div-m1)
-  * **adi,pll2-ndiv-b-cnt**: PLL2 Feedback N divider, counter B (range 0..63)
   * **adi,pll2-freq-doubler-enable**: Enable frequency doubler
   * **adi,pll2-r1-div**: PLL2 R1 divider (range 1..31)
@@ Line 162: / Line 161: @@
 		/* PLL2 config */
-		adi,pll2-ndiv-a-cnt = <0>;
-		adi,pll2-ndiv-b-cnt = <25>;
+		* Valid ranges based on VCO locking range:
-		adi,pll2-vco-diff-m1 = <4>;
+		*   1150.000 MHz - 1341.666 MHz
-		adi,pll2-r1-div = <2>;
+		*    862.500 MHz - 1006.250 MHz
-		adi,pll2-n2-div = <25>;
+		*    690.000 MHz -  805.000 MHz
+		*/
+        	adi,pll2-m1-frequency = <1000000000>;
 		adi,pll2-charge-pump-current-nA = <805000>;

Wiki