This version (10 Jun 2022 16:45) was approved by Robin Getz.

FreeRTOS Add-In Examples

The FreeRTOS Add-In has several examples that have been created so that the user can easily get a feel for how FreeRTOS works, and how the Add-In is used to control the configuration parameters through the use of the User Interface.

These examples are shipped separately from the FreeRTOS Add-In for now, with plans to fully integrate the examples with future releases.

Get the Hardware Ready

The Analog Devices FreeRTOS product supports a couple of reference development board from Analog Devices, including ADSP-SC589/ADSP-SC584/ADSP-SC573 EZ-Kit board, BF707 EZ-Kit board and ADZS-21569 EZ-Kit board. Depending on which software development tool you are using, different JTAG debug board are required.

Below is a list of the hardware involved.

ADI reference board:

Jtag debugger:

Host PC:

A mainstream configuration of Windows PC is required. Verify that your PC has these minimum requirements:

  • 2 GHz single core processor; 3.3GHz dual core or better recommended
  • 4 GB RAM; 8GB or more recommended
  • 2 GB available disk space
  • One open USB port

Get the Source Code Ready

You can get examples for FreeRTOS (with and without the Add-In) from freertos-examples

resources/tools-software/freertos/freertos-addin/examples.txt · Last modified: 25 Apr 2022 14:01 by Murray Anderson