Wiki

Below is the source of this page. To edit this source as well as other pages on the wiki, you must login.
[[:resources:tools-software:a2bv2:quickstartguide|Click here to return to the QSG homepage]]
====== Introduction ======
===== Purpose =====
This document enables the user to evaluate A2B network from SigmaStudio+ tool.

===== Scope =====
This guide details the steps for setting up and running the sample demo. Prior knowledge of using the SigmaStudio+ tool is recommended.

===== Organization of the document =====
Sections [[:resources:tools-software:a2bv2:quickstartguide:systemrequirements|2]] and [[:resources:tools-software:a2bv2:quickstartguide:hardware-setup|3]] contains the various requirements and instructions to set up the sample demo system.

Section [[:resources:tools-software:a2bv2:quickstartguide:running-sample-demo|4]] explains the steps for running the demo.

Appendices [[:resources:tools-software:a2bv2:quickstartguide:appendix-a|A]] through [[:resources:tools-software:a2bv2:quickstartguide:appendix-c|C]] gives a brief overview of using A2B in SigmaStudio+.

Appendix [[:resources:tools-software:a2bv2:quickstartguide:appendix-d|D]] has instructions to build an ADSP-2156x target project.

Appendix [[:resources:tools-software:a2bv2:quickstartguide:appendix-e|E]] talks about the crossbar view and it’s configuration.

Appendix [[:resources:tools-software:a2bv2:quickstartguide:appendix-g|G]] explains the steps for creating schematics with the A2B Bus Analyzer Platform, when the A2B Bus Analyzer Device is used in the A2B network.
Analog Devices Wiki

Page Tools
