Wiki

The most recent version of this page is a draft.DiffThis version (22 Nov 2022 09:57) was approved by Gireesha Nirvanaiah.The Previously approved version (22 Nov 2022 09:54) is available.Diff

This is an old revision of the document!


Introduction

Purpose

This document enables the user to evaluate A2B network from SigmaStudio+ tool.

Scope

This guide details the steps for setting up and running the sample demo. Prior knowledge of using the SigmaStudio+ tool is recommended.

Organization of the document

Sections 2 and 3 contains the various requirements and instructions to set up the sample demo system. Section 4 explains the steps for running the demo. Appendices A through C gives a brief overview of using A2B in SigmaStudio+. Appendix D has instructions to build an ADSP-2156x target project. Appendix E talks about the crossbar view and it’s configuration. Appendix G explains the steps for creating schematics with the A2B Bus Analyzer Platform, when the A2B Bus Analyzer Device is used in the A2B network.

/srv/wiki.analog.com/data/pages/resources/tools-software/a2bv2/quickstartguide/introduction.txt · Last modified: 08 Dec 2022 12:34 by Gireesha Nirvanaiah