This version (06 Oct 2023 09:11) was approved by Gireesha Nirvanaiah.
Table of Contents
Click here to return to the Hardware Setup page
AD243x standard Power
Evaluation boards
The AD243x standard power evaluation boards used in the demos are explained in the following subsections.
EVAL-AD2433WA1BZ
Figure 11 shows a EVAL-AD2433WA1BZ board which can be used as a standard power A2B main or a local powered A2B sub node. The board has following peripherals
- AD2433 A2B transceiver
- Stereo Audio Codec (ADAU1961) with Line I/O
- Sigma DSP (ADAU1452) with Optical SPDIF I/O
- 512K Self-Boot Memory (EEPROM)
Figure 11: EVAL-AD2433WA1BZ board
EVAL-AD2433WB1BZ
Figure 12 shows EVAL-AD2433WB1BZ board which can be used as a standard power bus powered A2B sub node. The board has following peripherals
- AD2433 A2B transceiver
- Stereo Audio Codec (ADAU1961) with Line I/O
- 4 Microphones
Figure 12: EVAL-AD2433WB1BZ board
Connections
To run the sample demo, the following setup connections are to be made.
Evaluation boards
A2B Evaluation boards shall be connected in the following order
- Connect twisted-pair wire between the “B” connector on the Main board and the “A” connector on the Sub 0 board.
- Connect twisted-pair wire between the “B” connector on the Sub 0 board and the “A” connector on the Sub 1 board.
- Connect 12V power supply to the power connector on Main board.
This connection is recommended for running the standard power sample demo using PC as host.
Figure 13: A2B Eval board connections: Standard Power
Audio In/out
- Connect separate audio sources (e.g., output from an iPod) to ‘Audio Line- in’ ports, on A2B subordinate boards.
- Connect separate audio sinks (e.g., headphones and speakers) to ‘Audio Line-out’ on A2B main and subordinate boards.
resources/tools-software/a2bv2/quickstartguide/hardware-setup/ad243x-standard-power.txt · Last modified: 09 Dec 2022 08:57 by Gireesha Nirvanaiah