Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
resources:technical-guides:best_engineering_practices_when_using_adxl_accelerometers [12 Feb 2021 20:24]
Pablo del Corro
resources:technical-guides:best_engineering_practices_when_using_adxl_accelerometers [16 Feb 2021 15:36]
Pablo del Corro
Line 1: Line 1:
 +====== Best Engineering practices when using ADXL accelerometers ======
 +
 ===== Introduction ===== ===== Introduction =====
 This document intention is to provide some tips and basic considerations when using ADI ADXL accelerometers. This document intention is to provide some tips and basic considerations when using ADI ADXL accelerometers.
Line 19: Line 21:
  
 === Power Cycling ===  === Power Cycling === 
-It is common in ULP applications to power cycle the accelerometer to reduce power consumption. When using this technique, please remember that it is highly recommend to always ​be started ​up the accelerometer from ground level (0 V) to ensure proper operation. ​+It is common in ULP applications to power cycle the accelerometer to reduce power consumption. When using this technique, please remember that it is highly recommend to always ​start up the accelerometer from ground level (0 V) to ensure proper operation. ​
 If this is not possible, care must be taken regarding the following specifications:​ If this is not possible, care must be taken regarding the following specifications:​
  
resources/technical-guides/best_engineering_practices_when_using_adxl_accelerometers.txt · Last modified: 30 Mar 2021 22:52 by Pablo del Corro