Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | Next revisionBoth sides next revision | ||
| resources:fpga:xilinx:pmod:ad7091r [10 Dec 2012 15:52] – Download Wrapper Alexandru.Tofan | resources:fpga:xilinx:pmod:ad7091r [03 Jan 2013 20:42] – external edit | ||
|---|---|---|---|
| Line 26: | Line 26: | ||
| ==== Running Demo (SDK) Program ==== | ==== Running Demo (SDK) Program ==== | ||
| - | <note tip>If you are not familiar with LX9 and/or Xilix tools, please visit\\ [[http:// | + | <WRAP tip>If you are not familiar with LX9 and/or Xilix tools, please visit\\ [[http:// |
| If you are not familiar with Nexys™3 and/or Xilix tools, please visit\\ [[http:// | If you are not familiar with Nexys™3 and/or Xilix tools, please visit\\ [[http:// | ||
| - | </note> | + | </WRAP> |
| Extract the project from the archive file (AD7091R_< | Extract the project from the archive file (AD7091R_< | ||
| Line 61: | Line 61: | ||
| The hardware SPI access allows receiving data from the AD7091R. | The hardware SPI access allows receiving data from the AD7091R. | ||
| - | <note important> | + | <WRAP important> |
| * Connecting the PmodAD6 to the boards using an extension cable provides ease of use. | * Connecting the PmodAD6 to the boards using an extension cable provides ease of use. | ||
| * UART must be set to 115200 Baud Rate for the Avnet LX-9 Microboard or 9600 Baud Rate for the Digilent Nexys™3 Board. | * UART must be set to 115200 Baud Rate for the Avnet LX-9 Microboard or 9600 Baud Rate for the Digilent Nexys™3 Board. | ||
| * Reference voltage is 2.5V | * Reference voltage is 2.5V | ||
| - | </note> | + | </WRAP> |
resources/fpga/xilinx/pmod/ad7091r.txt · Last modified: 09 Jan 2021 00:49 by Robin Getz