Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

resources:fpga:xilinx:interposer:brkout [05 Jul 2012 14:38]
ACozma created
resources:fpga:xilinx:interposer:brkout [05 Jul 2012 14:54] (current)
ACozma Approved
Line 3: Line 3:
 ====== Overview ====== ====== Overview ======
  
-This document presents the steps to setup an environment for testing the **FMC-SDP Interposer Board** together with the Xilinx KC705 FPGA board and the Xilinx Embedded Development Kit (EDK). Below is presented a picture of the ADZS-BRKOUT-EX3 Evaluation Board with the Xilinx KC705 board.+This document presents the steps to setup an environment for testing the **FMC-SDP Interposer Board** together with the **ADZS-BRKOUT-EX3** SDP breakout board, ​the Xilinx KC705 FPGA board and the Xilinx Embedded Development Kit (EDK). Below is presented a picture of the test system setup using the the Xilinx KC705 board.
  
 {{ :​resources:​fpga:​xilinx:​interposer:​sdp_brkout.jpg?​400 }} {{ :​resources:​fpga:​xilinx:​interposer:​sdp_brkout.jpg?​400 }}
- 
 ===== More information ===== ===== More information =====
   * [[http://​www.xilinx.com/​products/​boards-and-kits/​EK-K7-KC705-G.htm | Xilinx KC705 FPGA board]]   * [[http://​www.xilinx.com/​products/​boards-and-kits/​EK-K7-KC705-G.htm | Xilinx KC705 FPGA board]]
Line 17: Line 16:
  
   * [[http://​www.xilinx.com/​products/​boards-and-kits/​EK-K7-KC705-G.htm | Xilinx KC705 FPGA board]]   * [[http://​www.xilinx.com/​products/​boards-and-kits/​EK-K7-KC705-G.htm | Xilinx KC705 FPGA board]]
-  * **FMC-SDP interposer** ​board+  * **FMC-SDP interposer ​board**
   * **ADZS-BRKOUT-EX3** evaluation board   * **ADZS-BRKOUT-EX3** evaluation board
  
Line 26: Line 25:
 ===== Downloads ===== ===== Downloads =====
  
-  * {{:​resources:​fpga:​xilinx:​interposer:​ad2s1205_evalboard.zip|Reference Design Files}}+  * {{:​resources:​fpga:​xilinx:​interposer:​fmc_sdp_test.zip|Reference Design Files}}
  
 The following table presents a short description the reference design archive contents. The following table presents a short description the reference design archive contents.
Line 45: Line 44:
 {{:​resources:​fpga:​xilinx:​interposer:​baud_config.png?​300|}} {{:​resources:​fpga:​xilinx:​interposer:​baud_config.png?​300|}}
  
-  * Program the Xilinx KC705 adapter board with the “download.bit” file provided in the test project archive. Programming is done using the Xilinx Impact application.+  * Program the Xilinx KC705 adapter board with the //**“download.bit”**// file provided in the test project archive ​in the //**Bit**// folder. Programming is done using the Xilinx Impact application.
   * After the FPGA is programmed the test will start automatically and on the terminal window the test status will be displayed. If any errors are detected the application will list the pins on which the errors were detected. ​   * After the FPGA is programmed the test will start automatically and on the terminal window the test status will be displayed. If any errors are detected the application will list the pins on which the errors were detected. ​
  
resources/fpga/xilinx/interposer/brkout.txt · Last modified: 05 Jul 2012 14:54 by ACozma