Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
resources:fpga:xilinx:interposer:adf4002 [30 Oct 2013 14:24]
CsomI Delete ucProbe references, added UART interface snapshots and descriptions
resources:fpga:xilinx:interposer:adf4002 [31 Oct 2013 10:56] (current)
CsomI Fix some typos.
Line 70: Line 70:
 | **setregister=** | Update the selected latch with the current set ups. Accepted value:\\ latch:\\ 0 - Reference latch\\ 1 - N Counter Latch\\ 2 - Function Latch\\ 3 - Initialization Latch\\ value:\\ 24 bit values, you can find more information about the registers in the data sheet | | **setregister=** | Update the selected latch with the current set ups. Accepted value:\\ latch:\\ 0 - Reference latch\\ 1 - N Counter Latch\\ 2 - Function Latch\\ 3 - Initialization Latch\\ value:\\ 24 bit values, you can find more information about the registers in the data sheet |
 | **getregister?​** | Print the specified latch values in a human readable format. Accepted value:\\ latch:\\ 0 - Reference latch\\ 1 - N Counter Latch\\ 2 - Function Latch\\ 3 - Initialization Latch | | **getregister?​** | Print the specified latch values in a human readable format. Accepted value:\\ latch:\\ 0 - Reference latch\\ 1 - N Counter Latch\\ 2 - Function Latch\\ 3 - Initialization Latch |
-| **setfreq=** | Set the VCO frequency. Accepted value:\\ 5 .. 400 - betwwen 5Mhz and 400Mhz | +| **setfrequency=** | Set the VCO frequency. Accepted value:\\ 5 .. 400 - betwwen 5Mhz and 400Mhz | 
-| **getfreq?** | Print the actual VCO frequency. |+| **getfrequency?** | Print the actual VCO frequency. |
  
 Commands can be executed using a serial terminal connected to the UART peripheral of Xilinx KC705 FPGA. Commands can be executed using a serial terminal connected to the UART peripheral of Xilinx KC705 FPGA.
resources/fpga/xilinx/interposer/adf4002.txt · Last modified: 31 Oct 2013 10:56 by CsomI