Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
resources:fpga:xilinx:interposer:ad9787 [13 Jul 2012 08:14]
ACozma Approved
resources:fpga:xilinx:interposer:ad9787 [03 Jan 2013 20:42] (current)
Line 9: Line 9:
 ===== Evaluation Boards ===== ===== Evaluation Boards =====
  
-  * [[adi>en/​digital-to-analog-converters/​da-converters/​ad9785/​products/​EVAL-AD9785/​eb.html|AD9785-DPG2-EBZ]] +  * [[adi>​AD9785-DPG2-EBZ]] 
-  * [[adi>en/​digital-to-analog-converters/​da-converters/​ad9787/​products/​EVAL-AD9787/​eb.html|AD9787-DPG2-EBZ]] +  * [[adi>​AD9787-DPG2-EBZ]] 
-  * [[adi>en/​digital-to-analog-converters/​da-converters/​ad9788/​products/​EVAL-AD9788/​eb.html|AD9788-DPG2-EBZ]]+  * [[adi>​AD9788-DPG2-EBZ]]
    
 ===== Introduction ===== ===== Introduction =====
Line 18: Line 18:
 high dynamic range TxDAC® devices, respectively,​ that provide a sample rate of 800 MSPS, permitting multicarrier generation up to the Nyquist frequency. Features are included for optimizing direct conversion transmit applications,​ including complex digital modulation, as well as gain, phase, and offset compensation. high dynamic range TxDAC® devices, respectively,​ that provide a sample rate of 800 MSPS, permitting multicarrier generation up to the Nyquist frequency. Features are included for optimizing direct conversion transmit applications,​ including complex digital modulation, as well as gain, phase, and offset compensation.
  
-**HW Platform(s):​** [[http://​www.xilinx.com/​products/​boards-and-kits/​EK-V6-ML605-G.htm|Virtex-6 ML605 (Xilinx)]], [[adi>en/​digital-to-analog-converters/​da-converters/​ad9785/​products/​EVAL-AD9785/eb.html|AD9785 Evaluation Board (ADI)]] / [[adi>en/​digital-to-analog-converters/​da-converters/​ad9787/​products/​EVAL-AD9787/eb.html|AD9787 Evaluation Board (ADI)]] / [[adi>en/​digital-to-analog-converters/​da-converters/​ad9788/​products/​EVAL-AD9788/eb.html|AD9788 Evaluation Board (ADI)]], [[http://​www.analog.com/​en/​digital-to-analog-converters/​da-converters/​ad-dac-fmc/​products/​product.html|DAC FMC Interposer Board (ADI)]] \\+**HW Platform(s):​** [[http://​www.xilinx.com/​products/​boards-and-kits/​EK-V6-ML605-G.htm|Virtex-6 ML605 (Xilinx)]], [[adi>​EVAL-AD9785|AD9785 Evaluation Board (ADI)]] / [[adi>​EVAL-AD9787|AD9787 Evaluation Board (ADI)]] / [[adi>​EVAL-AD9788|AD9788 Evaluation Board (ADI)]], [[http://​www.analog.com/​en/​digital-to-analog-converters/​da-converters/​ad-dac-fmc/​products/​product.html|DAC FMC Interposer Board (ADI)]] \\
 **System:** Microblaze, AXI, UART **System:** Microblaze, AXI, UART
  
Line 43: Line 43:
 ==== Running Demo (SDK) Program ==== ==== Running Demo (SDK) Program ====
  
-<note tip>If you are not familiar with ML605 and/or Xilix tools, please visit\\ [[http://​www.xilinx.com/​products/​boards/​ml605/​reference_designs.htm]] for details. +<WRAP tip>If you are not familiar with ML605 and/or Xilix tools, please visit\\ [[http://​www.xilinx.com/​products/​boards/​ml605/​reference_designs.htm]] for details. 
-</note>+</WRAP>
  
 Extract the project from the archive file (AD978x.zip) to the location you desire. ​ Extract the project from the archive file (AD978x.zip) to the location you desire. ​
Line 115: Line 115:
   - **Section 11** See datasheet pg. 32, Table 21, 22 and 23.   - **Section 11** See datasheet pg. 32, Table 21, 22 and 23.
  
-<note important>​+<WRAP important>​
   * If you drag a slider and it doesn'​t change the value in the numeric indicator next to it, please press Stop and then Play again. At the bottom of the screen, the bytes/sec should be increasing with 200 per second. If they increase only with 50 per second, please press Stop and Play again.   * If you drag a slider and it doesn'​t change the value in the numeric indicator next to it, please press Stop and then Play again. At the bottom of the screen, the bytes/sec should be increasing with 200 per second. If they increase only with 50 per second, please press Stop and Play again.
   * If you receive (Pc Port Open) at the bottom of the screen, please press Stop, close your COM port, reprogram the FPGA, launch the software and try again.   * If you receive (Pc Port Open) at the bottom of the screen, please press Stop, close your COM port, reprogram the FPGA, launch the software and try again.
-</note>+</WRAP>
 ===== Downloads ===== ===== Downloads =====
 {{:​resources:​fpga:​xilinx:​interposer:​ad9787.zip|Reference design source code}} {{:​resources:​fpga:​xilinx:​interposer:​ad9787.zip|Reference design source code}}
resources/fpga/xilinx/interposer/ad9787.txt · Last modified: 03 Jan 2013 20:42 (external edit)