Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
resources:fpga:xilinx:interposer:ad5541a [01 Oct 2013 14:20]
LucianS [Hardware setup]
resources:fpga:xilinx:interposer:ad5541a [01 Oct 2013 16:08] (current)
LucianS [Reference Project Overview]
Line 82: Line 82:
 | **ldacPin=** | Sets the output value of LDAC pin. Accepted values:\\ 0 - sets LDAC pin low.(default)\\ 1 - sets LDAC pin high. | | **ldacPin=** | Sets the output value of LDAC pin. Accepted values:\\ 0 - sets LDAC pin low.(default)\\ 1 - sets LDAC pin high. |
 | **ldacPin?​** | Displays the value of LDAC pin. | | **ldacPin?​** | Displays the value of LDAC pin. |
-| **clrPin=** | Sets the output value of CLR pin. Accepted values:\\ 0 - sets CLR pin low.\\ 1 - sets CLR pin high.(default) | 
-| **clrPin?** | Displays the value of CLR pin. | 
- 
- 
  
 Commands can be executed using a serial terminal connected to the UART peripheral of Xilinx KC705 FPGA. Commands can be executed using a serial terminal connected to the UART peripheral of Xilinx KC705 FPGA.
resources/fpga/xilinx/interposer/ad5541a.txt · Last modified: 01 Oct 2013 16:08 by LucianS