Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| resources:fpga:altera:software_setup [02 Oct 2019 13:45] – Antoniu Miclaus | resources:fpga:altera:software_setup [02 Oct 2019 14:08] (current) – Antoniu Miclaus | ||
|---|---|---|---|
| Line 36: | Line 36: | ||
| * At the **Project** tab define your current project name and application executable. (.elf) | * At the **Project** tab define your current project name and application executable. (.elf) | ||
| - | + | ||
| - | * The output of the example program can be viewed in the SDK console. | + | * On the Target Connection tab, press the **Refresh Connections** button. You may need to expand the window or scroll to the right to see this button. |
| + | |||
| + | * Check the **Ignore mismatched system ID** option. | ||
| + | |||
| + | * Check the **Ignore mismatched system timestamp** option. | ||
| + | |||
| + | * The output of the example program can be viewed in the Console Window. | ||
| * When the run configuration is done, the software can be started by clicking the **Run** button. | * When the run configuration is done, the software can be started by clicking the **Run** button. | ||
| * Your new bare metal application should run | * Your new bare metal application should run | ||
resources/fpga/altera/software_setup.txt · Last modified: 02 Oct 2019 14:08 by Antoniu Miclaus