Differences

This shows you the differences between two versions of the page.

--- resources:fpga:altera:software_setup [02 Oct 2019 13:44] – Antoniu Miclaus
+++ resources:fpga:altera:software_setup [02 Oct 2019 13:45] – Antoniu Miclaus
@@ Line 28: / Line 28: @@
    {{ :resources:fpga:altera:programmer.png?650 |Programmer}}
-   * Double-click the first device under the **File** column and browser for the **.sof** file required for the project. Make sure the **Program/Configure** column is checke. Press the **Start** button to program the FPGA.
+   * Double-click the first device under the **File** column and browser for the **.sof** file required for the project. Make sure the **Program/Configure** column is checked. Press the **Start** button to program the FPGA.
 {{ :resources:fpga:altera:add_sof.png?650 |Empty application project}}
-   * After the FPGA was programmed, we need to create a new Run configuration in the Nios II SDK, by selecting **Run** -> **Run Configurations...**, in the Run Configuration windows select the **Nios II Hardware** and click at the **New Configuration** button at the upper left corner.
+   * After the FPGA was programmed, we need to create a new Run configuration in the Nios II project, by selecting **Run** -> **Run Configurations...**, in the Run Configuration windows select the **Nios II Hardware** and click at the **New Configuration** button at the upper left corner.
 {{ :resources:fpga:altera:run_config.png?650 |Create new run configuration}}

Wiki