Wiki

This version (04 Sep 2012 09:24) was approved by Adrian Costina.

In case there is a communication problem with the board the follwing actions can be perfomed in order to try to fix the issues:

  • Check that the evaluation board is powered.
  • Check that the USB connection cable is properly connected to the device and to the computer and that the USB Blaster Device Driver driver is installed correctly. If the driver is not correctly installed perform the steps described in the Getting Started → Install te USB-Blaster Device Driver section.
resources/fpga/altera/bemicro/troubleshooting12.txt · Last modified: 04 Sep 2012 09:24 by Adrian Costina