This version is outdated by a newer approved version.
This version (31 Aug 2017 20:11) was approved by Robin Getz.The Previously approved version (31 Aug 2017 18:56) is available.
This version (31 Aug 2017 20:11) was approved by Robin Getz.The Previously approved version (31 Aug 2017 18:56) is available.This is an old revision of the document!
Table of Contents
Breakout Carrier
Hardware
Rev C Breakout Carrier
This is the Rev C schematic and layout files for the breakout carrier.
- Rev C Allegro Board File. (This file is compressed) Get the Allegro FREE Physical Viewer (You need 16.6 or higher).
Top Board Picture
Feature List
| 10/100/1000 Mbps Ethernet |
| USB2.0 OTG |
| USB-UART |
| PC4 JTAG interface |
| 162 User I/O pins |
| Two 60-pin (2×30) 0.1” footprints |
| Four 32-pin (2×16) 0.1” footprints |
| 4 user push buttons |
| 4 user switches |
| 4 user LEDs |
| 5V @ 2A input |
| Select 1.8V, 2.5V, or 3.3V for SOM I/O or insert an external supply |
| Measure Zynq PL I/O bank current with convenient access points |
resources/eval/user-guides/pzsdr/carriers/brk.1504203054.txt.gz · Last modified: 31 Aug 2017 20:10 by Robin Getz