Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
resources:eval:user-guides:picozed_sdr [20 Apr 2017 22:01]
dbabicz changing to ADI part numbers - no Avnet website
resources:eval:user-guides:picozed_sdr [25 May 2017 19:11] (current)
rgetz old revision restored (10 Feb 2017 19:55)
Line 1: Line 1:
-====== ​RFSOM SDR ======+====== ​PicoZed ​SDR ======
  
-The RFSOM SDR is built on a portfolio of highly integrated System-On-Module (SOMs) based on the Xilinx Zynq®-7000 All Programmable (AP)SoC. These SOMs are application-specific solutions designed to meet the unprecedented demand for wideband wireless communications. Built on the AD9361it is schematically & HDL similar to the [[AD-FMCOMMS3-EBZ]].+The product previously known as the PicoZed ​SDRis now known as the ADI RF SOMand can be found here:
  
-The purpose of the RFSOM SDR is to provide an RF platform to software developers, system architects, product developers, etc, who want a single platform which operates over a wide tuning range (70 MHz – 6 GHz).  +[[/​resources/​eval/​user-guides/​adrv936x_rfsom]]
- +
-===== Table of Contents ===== +
- +
-  - [[http://​www.analog.com/​en/​index.html]] +
-  - [[.:​ad-fmcomms2-ebz:​introduction|Introduction]] +
-  - [[http://​www.analog.com/​en/​index.html|RFSOM SDR Hardware]] +
-  - [[.:​ad-fmcomms2-ebz:​hardware:​tuning|Tuning the system]] +
-  - Carriers +
-    - [[.:​pzsdr:​carriers:​fmc|FMC Carrier (ADRV1CRR-FMC)]] +
-        - [[http://​www.analog.com/​en/​index.html|Purchase]] +
-    - [[.:​pzsdr:​carriers:​brk|Breakout Carrier (ADRV1CRR-BOB)]] +
-        - [[http://​www.analog.com/​en/​index.html|Purchase]] +
-    - [[.:​pzsdr:​carriers:​pcie|PCIe Carrier (PZSDRCC-PCIE)]] +
-        - [[http://​www.analog.com/​en/​index.html|Purchase]] +
-  - [[.:​pzsdr/​power-and-sequencing|Power and Sequencing]] +
-  - Use the RFSOM SDR Hardware to better understand the AD9361 +
-    - [[.:​ad-fmcomms2-ebz:​prerequisites|What you need to get started]] +
-    - [[.:​ad-fmcomms2-ebz:​quickstart|Quick Start Guides]] +
-      - [[.:​ad-fmcomms2-ebz:​quickstart:​zynq|Linux on PicoZed SDR]] +
-      - [[/​resources/​tools-software/​linux-software/​zynq_images#​preparing_the_image|Configure a pre-existing SD-Card]] +
-      - [[/​resources/​tools-software/​linux-software/​zynq_images#​staying_up_to_date|Update the old card you received with your hardware]] +
-    - Linux Applications +
-      - [[resources/​tools-software/​linux-software/​iio_oscilloscope|IIO Scope]] +
-      - [[resources/​tools-software/​linux-software/​fmcomms2_plugin|PicoZed SDR Control IIO Scope Plugin]] +
-      - [[resources/​tools-software/​linux-software/​fmcomms2_advanced_plugin|PicoZed SDR Advanced Control IIO Scope Plugin]] +
-      - [[.:​ad-fmcomms2-ebz:​software:​linux:​applications:​shell_scripts|Command Line/Shell scripts]] +
-    - Push custom data into/out of the PicoZed SDR. +
-      - [[.:​ad-fmcomms2-ebz:​software:​basic_iq_datafiles|Basic Data files and formats]] +
-      - [[.:​ad-fmcomms2-ebz:​software:​datafiles|Create and analyze data files in MATLAB]] +
-      - [[:​resources/​tools-software/​linux-software/​libiio/​clients/​matlab_simulink|Stream data into/out of MATLAB]] +
-      - [[:​resources/​tools-software/​linux-software/​libiio#​libiio_-_ad9361_iio_streaming_example|AD9361 libiio streaming example]] +
-  - Design with the AD9361 +
-    - [[.:​ad-fmcomms2-ebz:​ad9361|Understanding the AD9361]] +
-      - [[adi>​AD9361|AD9361 Product page]] +
-      - [[adi>​en/​rfif-components/​rfif-transceivers/​products/​AD9361-Integrated-RF-Agile-Transceiver-Design-Res/​fca.html|Full Datasheet and chip design package]] +
-      - [[.:​ad-fmcomms2-ebz:​software:​filters|MATLAB Filter Design Wizard for AD9361]]  +
-    - Simulation +
-      - [[.:​ad-fmcomms2-ebz:​software:​simrf|MathWorks SimRF Models of the AD9361]] +
-    - Hardware in the Loop / How to design your own custom BaseBand +
-      - MATLAB/​Simulink Examples +
-        - [[:​resources/​tools-software/​linux-software/​libiio/​clients/​fmcomms2_3_simulink|Stream data into/out of MATLAB]] +
-        - [[:​resources/​tools-software/​linux-software/​libiio/​clients/​beacon_frame_receiver_simulink#​beacon_frame_receiver_example|Beacon Frame Receiver Example]] +
-        - [[:​resources/​tools-software/​linux-software/​libiio/​clients/​qpsk_example|QPSK Transmit and Receive Example]] +
-        - [[:​resources/​tools-software/​linux-software/​libiio/​clients/​lte_example|LTE Transmit and Receive Example]] +
-        - [[:​resources/​tools-software/​linux-software/​libiio/​clients/​adsb_example|ADS-B Airplane Tracking Example]] +
-      - [[/​resources/​tools-software/​linux-software/​gnuradio|GNU Radio]] +
-      - [[/​resources/​tools-software/​fm-radio|FM Radio/​Tuner]] (listen to FM signals on the HDMI monitor) +
-      - [[/​resources/​tools-software/​linux-software/​libiio#​libiio_-_ad9361_iio_streaming_example|C example]] +
-    - Targeting +
-      - [[/​resources/​eval/​user-guides/​ad-fmcomms2-ebz/​software/​matlab_bsp|Analog Devices BSP for MathWorks HDL Workflow Advisor]] +
-    - Complete Workflow +
-      - [[/​resources/​eval/​user-guides/​picozed_sdr/​tutorials/​adsb|ADS-B Airplane Tracking Tutorial]] +
-    - Design a custom AD9361 based platform +
-      - [[.:​ad-fmcomms2-ebz:​software:​linux|Linux software]] +
-        - [[/​resources/​tools-software/​linux-drivers/​iio-transceiver/​ad9361|Linux Device Driver]] +
-        - [[.:​ad-fmcomms2-ebz:​software:​linux:​zynq|Build the demo on ZC702, ZC706, or ZED from source]] +
-        - [[.:​ad-fmcomms2-ebz:​software:​linux:​microblaze|Build the demo on KC705 or VC707 for Microblaze from source]] +
-        - [[.:​ad-fmcomms2-ebz:​software:​linux:​zynq_2014r2|Build the 2014_R2 Release Linux kernel from source]] +
-        - [[.:​ad-fmcomms2-ebz:​software:​linux:​zynq_tips_tricks|Customizing the devicetree on the target]] +
-      - [[.:​ad-fmcomms2-ebz:​software:​baremetal|No-OS Driver]] +
-      - [[.:​ad-fmcomms2-ebz:​reference_hdl|HDL Reference Design]] which you must use in your FPGA. +
-        - [[.:​ad-fmcomms2-ebz:​interface_timing_validation|Digital Interface Timing Validation]] +
-  - Additional Documentation about SDR Signal Chains +
-    - [[.:​ad-fmcomms1-ebz:​math|The math behind the RF]] +
-  - [[.:​ad-fmcomms2-ebz:​help_and_support|Help and Support]] +
-===== Warning ===== +
- +
-{{page>​wiki/​common#​esd_warning&​nofooter&​noheader}}+
resources/eval/user-guides/picozed_sdr.txt · Last modified: 25 May 2017 19:11 by rgetz