Wiki

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
resources:eval:user-guides:picozed_sdr:tutorials:adsb [27 Jan 2023 09:44] – Replaced the obsolete Kuiper Linux page link Joyce Velascoresources:eval:user-guides:picozed_sdr:tutorials:adsb [30 Jan 2023 02:57] (current) Joyce Velasco
Line 40: Line 40:
 ===== Hardware Requirements ===== ===== Hardware Requirements =====
   * [[/resources/eval/user-guides/picozed_sdr|PicoZed SDR board]] is the RF receiver used in this tutorial. To make this board work properly, you will need:   * [[/resources/eval/user-guides/picozed_sdr|PicoZed SDR board]] is the RF receiver used in this tutorial. To make this board work properly, you will need:
-    * The latest [[:resources:tools-software/linux-software/kuiper-linux |Zynq image]] for the PicoZed SDR board.+    * The latest [[:resources:tools-software:linux-software:kuiper-linux |Zynq image]] for the PicoZed SDR board.
     * [[/resources/eval/user-guides/ad-fmcomms2-ebz/software/filters |MATLAB Filter Design Wizard for AD9361]] to configure the digital filters on [[adi>AD9361]].     * [[/resources/eval/user-guides/ad-fmcomms2-ebz/software/filters |MATLAB Filter Design Wizard for AD9361]] to configure the digital filters on [[adi>AD9361]].
     * A good understanding of how the [[adi>AD9361]] works. At a minimum, you should read over a basic intro for the [[/resources/eval/user-guides/ad-fmcomms2-ebz/ad9361|AD9361]].       * A good understanding of how the [[adi>AD9361]] works. At a minimum, you should read over a basic intro for the [[/resources/eval/user-guides/ad-fmcomms2-ebz/ad9361|AD9361]].  
Line 461: Line 461:
 **Step 5: Copy and paste the generated //BOOT.BIN// onto SD card** **Step 5: Copy and paste the generated //BOOT.BIN// onto SD card**
  
-Use the latest [[:resources:tools-software/linux-software/kuiper-linux |image]] from ADI. Replace the BOOT.BIN on SD card with the newly generated BOOT.BIN from HDL Workflow Advisor.  +Use the latest [[:resources:tools-software:linux-software:kuiper-linux |image]] from ADI. Replace the BOOT.BIN on SD card with the newly generated BOOT.BIN from HDL Workflow Advisor.  
  
 **Step 6: Use MATLAB Coder to generate C code** **Step 6: Use MATLAB Coder to generate C code**
resources/eval/user-guides/picozed_sdr/tutorials/adsb.txt · Last modified: 30 Jan 2023 02:57 by Joyce Velasco