This version is outdated by a newer approved version.
This version (03 Jan 2021 22:08) was approved by Robin Getz.The Previously approved version (20 Jan 2014 20:30) is available.
This version (03 Jan 2021 22:08) was approved by Robin Getz.The Previously approved version (20 Jan 2014 20:30) is available.This is an old revision of the document!
Table of Contents
LEGACY BREAKOUT BOARD WIKI GUIDE
OVERVIEW
Historically, the ADIS1613x, ADIS163xx and ADIS164xx products have used three different breakout board designs: the ADIS16IM1/PCBZ, ADIS16350/PCBZ and ADIS16135/PCBZ. All other breakout board part numbers have included one of these three boards. The primary purpose for these breakout boards has been to simplify connection with existing processor systems, while engineers can design their own embedded system boards to directly attach to these IMU/gyroscope products. In order to help reduce confusion in the order process, ADI is in the process of standardizing the accessories for each of these product families. This process has caused many products to be taken off of the market and will result in additional part number reduction. This Wiki Guide will provide links to historical design data, along with provide the latest on our “standardization process.”
ADIS16IMU1/PCBZ
The ADIS16IM1/PCBZ is an accessory that provides support for the ADIS1613x, ADIS163xx and ADIS1644x product families.
For a list of products that the ADIS16IM1/PCBZ connects directly to, visit the Product Details section of the ADIS16IM1/PCBZ product page.
For ADIS16IM1/PCBZ details, visit the ADIS16IM1/PCBZ Wiki Guide
OBSOLETE ADIS16XXX/PCBZ DOCUMENTATION
For those who are looking for information on evaluation tool products, which are no longer available, here you go!
ADIS16362/PCBZ Evaluation Tool Web Page
ADIS16364/PCBZ Evaluation Tool Web Page
ADIS16365/PCBZ Evaluation Tool Web Page
ADIS16367/PCBZ Evaluation Tool Web Page
ADIS16350/PCBZ DESIGN
The original IMU breakout board supported our very first Inertial Measurement Unit product, the ADIS16350. This board provides a simple connector translation function.
Legacy ADIS16135/PCBZ Layout
Legacy ADIS16135/PCBZ J1 & J2 Pin Assignments
Current Usage While we plan to phase this board out, it is still used in the following products: ADIS16300/PCBZ, ADIS16305/PCBZ, ADIS16334/PCBZ, ADIS16360/PCBZ, ADIS16362/PCBZ, ADIS16364/PCBZ, ADIS16365/PCBZ, ADIS16367/PCBZ, ADIS16400/PCBZ, ADIS16407/PCBZ, ADIS16445/PCBZ and ADIS16448/PCBZ.
Legacy Usage This design was also used in the following products, which are no longer available: ADIS16350/PCBZ, ADIS16354/PCBZ and ADIS16355/PCBZ.
ADIS16135/PCBZ (LEGACY DESIGN)
The original ADIS16135/PCBZ breakout board design used two different ribbon cable connectors.
Legacy ADIS16135/PCBZ Layout
Legacy ADIS16135/PCBZ J1 & J2 Pin Assignments
Legacy ADIS16135/PCBZ Electrical Schematic
This PCB design served the oldest version of the following breakout board products, all of which are now obsolete: ADIS16133/PCBZ, ADIS16135/PCBZ, ADIS16385/PCBZ
resources/eval/user-guides/inertial-mems/imu/legacy-imu-breakout.1609707858.txt.gz · Last modified: 03 Jan 2021 22:04 by Robin Getz